Ausmini
It is currently Sun Dec 17, 2017 12:44 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Rear Mini Wiring Loom
PostPosted: Thu Nov 02, 2017 2:50 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 243
Location: Brandy Hill, NSW
Whilst pulling my Cooper apart I found AYA9196 on the rear wiring loom.

When was this loom used (from date to finish date) and what models?

_________________
Purchased 1969 Mk2 27/9/2017, lots of wiring to work out
Mini's I've Had
Engine Numbers 9FSAY45020 9FXEY56080 9FSAY51265 9FSAY48408 9FXEY51628 9FSAY46292
Nugget Gold 1275LS VIN XNFAD18Y104200 12H902UH00015
Hi Ho Silver 1275LS 12H902UH000829


Top
 Profile  
 
PostPosted: Thu Nov 02, 2017 3:07 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 243
Location: Brandy Hill, NSW
Attachment:
Mini Rear Wiring Loom Old 003.jpg
Here is a Picture


You do not have the required permissions to view the files attached to this post.

_________________
Purchased 1969 Mk2 27/9/2017, lots of wiring to work out
Mini's I've Had
Engine Numbers 9FSAY45020 9FXEY56080 9FSAY51265 9FSAY48408 9FXEY51628 9FSAY46292
Nugget Gold 1275LS VIN XNFAD18Y104200 12H902UH00015
Hi Ho Silver 1275LS 12H902UH000829


Top
 Profile  
 
PostPosted: Thu Nov 02, 2017 4:39 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 4322
Location: Melbourne, VIC
Looks like that body harness was used for the MK II Mini series beginning in 1969. No information on whether it was superceded before the end of round-nose production but I suspect not. Reversing lights weren't introduced until the Clubman series, except the SPO41 harness to enable reversing lights.

On the following page, S is for Saloon and V for Van.

Attachment:
PUB1012 N30-1 R.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Thu Nov 02, 2017 4:44 pm 
Offline
1275cc
1275cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 4322
Location: Melbourne, VIC
The parts books show that loom as also being used in the early non-GT Clubman production.

Attachment:
PUB1052 pN16.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 8:52 am 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 243
Location: Brandy Hill, NSW
Thanks winabbey.

Do you have the illustrations referred to on the picture, if so, I am interested in seeing the Item illustration No.s 1B & 2D

Quote:
On the following page, S is for Saloon and V for Van.

Attachment:
PUB1012 N30-1 R.jpg

_________________
Purchased 1969 Mk2 27/9/2017, lots of wiring to work out
Mini's I've Had
Engine Numbers 9FSAY45020 9FXEY56080 9FSAY51265 9FSAY48408 9FXEY51628 9FSAY46292
Nugget Gold 1275LS VIN XNFAD18Y104200 12H902UH00015
Hi Ho Silver 1275LS 12H902UH000829


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 9:28 am 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18560
Location: Under the bonnet son!
There is a difference between the Mini K rear wiring loom and the Cooper S, in that there is a need for a switched 12 volt wire to run to the rear mounted electric fuel pump. This is a white wire running in the middle pin if I remember correctly. Otherwise it is left empty.

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 10:56 am 
Offline
1275cc
1275cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 4322
Location: Melbourne, VIC
cooperess wrote:
Thanks winabbey.

Do you have the illustrations referred to on the picture, if so, I am interested in seeing the Item illustration No.s 1B & 2D

The illustration page in the parts book just shows the routing of the harnesses, not the cable lengths, wiring colours and terminations that I suspect you are wanting? This information is in the workshop manual. Below are the relevant pages from the most comprehensive BMC produced workshop manual, TP832, the black covered publication.

Attachment:
PUB1012 N30 L.jpg


Attachment:
TP832C p n-20.jpg


Attachment:
TP832C p n-21.jpg


Mick wrote:
There is a difference between the Mini K rear wiring loom and the Cooper S, in that there is a need for a switched 12 volt wire to run to the rear mounted electric fuel pump. This is a white wire running in the middle pin if I remember correctly. Otherwise it is left empty.

I have a feeling the same loom was used but the fuel pump wire just taped up out of the way on the Mini K. I wonder if a Mini K owner could check their car and report back?


You do not have the required permissions to view the files attached to this post.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 11:11 am 
Offline
SooperDooperMiniCooper ExpertEngineering
User avatar

Joined: Fri Apr 29, 2005 9:46 am
Posts: 18560
Location: Under the bonnet son!
The Mini K looms I have had had the center wire not fitted, but certainly may not be across the board. I would suppose they would share a part number if they were used on either model?

_________________
SooperDooperMiniCooperExpertEngineering

All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 12:22 pm 
Offline
848cc
848cc

Joined: Sun Mar 16, 2014 11:01 am
Posts: 236
Location: TOWNSVILLE NQ
The rear wiring loom on my '69 Mk2 'S' has a white wire
Attachment:
image.jpeg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 12:56 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 14717
Location: Wodonga - Vic/NSW border
Stibbsy wrote:
The rear wiring loom on my '69 Mk2 'S' has a white wire
Attachment:
image.jpeg


which pin does it go to?

cooperess' loom appears to have a white wire, but doesn't go to the centre

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 1:28 pm 
Offline
848cc
848cc

Joined: Sun Mar 16, 2014 11:01 am
Posts: 236
Location: TOWNSVILLE NQ
Simon,
The white wire is on the ribbed edge of the block in the middle between purple wire and green with red trace. It's defineatly for the fuel pump.


Top
 Profile  
 
PostPosted: Sat Nov 11, 2017 2:48 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 38180
Location: near Baulkham Hills, NSW
My 70 Matic has no white wire, the pin is vacant. Ditto the loom in my son's 71 Clubby.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank @7000+, 45 Dellorto, RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. Going harder with Stealth Black Box in.:mrgreen:

Image


Top
 Profile  
 
PostPosted: Thu Dec 07, 2017 11:20 pm 
Offline
848cc
848cc

Joined: Sat Mar 23, 2013 9:30 pm
Posts: 259
Location: Adelaide
winabbey wrote:
I have a feeling the same loom was used but the fuel pump wire just taped up out of the way on the Mini K. I wonder if a Mini K owner could check their car and report back?

Doug,

Our Mini K is fairly early - YG2S1 776 - and has no white wire in the rear harness.
Attachment:
Harnessplug02.jpg

Attachment:
Harnessplug01.jpg


You do not have the required permissions to view the files attached to this post.

_________________
Don't listen to what I am saying... just understand what I mean.


Top
 Profile  
 
PostPosted: Fri Dec 08, 2017 5:59 am 
Offline
1275cc
1275cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 4322
Location: Melbourne, VIC
Tim I wrote:
Doug,

Our Mini K is fairly early - YG2S1 776 - and has no white wire in the rear harness.

Ah OK, thanks. So the Cooper S had a different rear harness to the other models without electric pump. All adds to the knowledge base.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.