| ausmini https://www.ausmini.com/forums/ |
|
| Cooper S Hydrolastic Displacer part numbers & identification https://www.ausmini.com/forums/viewtopic.php?f=2&t=100553 |
Page 1 of 1 |
| Author: | ianscampbell [ Sat Nov 21, 2020 1:57 pm ] |
| Post subject: | Cooper S Hydrolastic Displacer part numbers & identification |
We all wonder what some of those rusty old displacers are that we have stashed away, - So, - I thought I would compile a list from various sources, & I hope that nobody else feels as disappointed in their hydro bag treasure trove as I do! |
|
| Author: | ianscampbell [ Sat Nov 21, 2020 2:11 pm ] |
| Post subject: | Re: Cooper S Hydrolastic Displacer part numbers & identifica |
OK, - I admit that this is a pretty ordinary post due to the lopsided screen shot, but maybe one of the moderators would like to get the document via e mail & repost it for me? |
|
| Author: | winabbey [ Sat Nov 21, 2020 3:22 pm ] |
| Post subject: | Re: Cooper S Hydrolastic Displacer part numbers & identifica |
ianscampbell wrote: OK, - I admit that this is a pretty ordinary post due to the lopsided screen shot, but maybe one of the moderators would like to get the document via e mail & repost it for me? Nice work. I suggest we put it in the How To section once others have had a look and provided any feedback. Not suggesting any of the information is wrong, just that the definition of the markings varies quite a bit, even in factory documents. If you remember the sources of your data I suggest they be added to your document so any conflicts can be openly discussed. You can email it to me at bmcpublications@bigpond.com |
|
| Author: | winabbey [ Sat Nov 21, 2020 3:57 pm ] |
| Post subject: | Re: Cooper S Hydrolastic Displacer part numbers & identifica |
ianscampbell wrote: ... maybe one of the moderators would like to get the document via e mail & repost it for me? Click on image to enlarge Attachment: AUSTRALIAN PRODUCTION MINI HYDROLASTIC DISPLACER UNIT PART NUMBERS ex Ian Campbell.jpg
|
|
| Author: | Bill B [ Sun Nov 22, 2020 9:34 am ] |
| Post subject: | Re: Cooper S Hydrolastic Displacer part numbers & identifica |
That is a good list and useful for Oz minis. There are some details regarding the Clubman GT units without part number stampings, but colour dots, here: viewtopic.php?f=2&t=99497&hilit=hydrolastic+displacers |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|