ausmini • View topic - Spin on filter and oil cooler hose replacement

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Spin on filter and oil cooler hose replacement

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

Tomtax

Post subject: Spin on filter and oil cooler hose replacement

Posted: Thu Mar 25, 2021 10:07 pm

848cc

Joined: Sun Nov 09, 2014 8:44 pm
Posts: 169
Location: Melbourne

Hi All
Finally I will be fitting my spin on oil filter housing with new oil cooler hoses.

With all the oil cooler hose ends that is the two at the oil cooler, engine block and oil filter housing do you use some kind of thread sealant when screwing them in

What do you guys recommend?

Thanks again

Top

drmini in aust

Post subject: Re: Spin on filter and oil cooler hose replacement

Posted: Fri Mar 26, 2021 4:42 am

religious status

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39642
Location: near Baulkham Hills, NSW

The hose ends are flares, you don't put sealant on them.
The block fitting seals on a copper washer.
The oil housing nipple i use Loctite 262 and screw it in.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:

Top

Tomtax

Post subject: Re: Spin on filter and oil cooler hose replacement

Posted: Fri Mar 26, 2021 8:10 pm

848cc

Joined: Sun Nov 09, 2014 8:44 pm
Posts: 169
Location: Melbourne

Thanks again Doc

Top

Page 1 of 1

[ 3 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: Bing [Bot] and 51 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: