ausmini https://www.ausmini.com/forums/ |
|
Radiator Drain Plug https://www.ausmini.com/forums/viewtopic.php?f=2&t=102154 |
Page 1 of 1 |
Author: | slabber [ Tue Feb 06, 2024 4:48 pm ] |
Post subject: | Radiator Drain Plug |
Hi - does anyone have a photo of the original 72 Australian radiator drain at the bottom? Attached is a photo of mine which looks to have the head sheared off? Does it look like the original Radiator? Cheers |
Author: | winabbey [ Tue Feb 06, 2024 4:57 pm ] |
Post subject: | Re: Radiator Drain Plug |
This is the drain plug on my 1970 Cooper S. Attachment: Radiator Drain Plug.jpg Is the brass ID plate still soldered to the header tank? If so what is the part number. I can check parts lists to confirm. Attachment: AYA2077 Radiator a.jpg
|
Author: | slabber [ Tue Feb 06, 2024 5:17 pm ] |
Post subject: | Re: Radiator Drain Plug |
Thanks for that! Mine certainly looks similar, but the plug is rogue/unuseable. Mine has no ID plate. Thanks again. |
Author: | Steam [ Wed Feb 07, 2024 7:04 am ] |
Post subject: | Re: Radiator Drain Plug |
I do not know the dates but there was one with a small wing nut type tap affair set in larger plug, then there was just the plug as you have shown. |
Author: | simon k [ Thu Feb 08, 2024 8:10 pm ] |
Post subject: | Re: Radiator Drain Plug |
just a 1/8 BSPT blanking plug at Pirtek etc. if you're chasing one |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |