ausmini
https://www.ausmini.com/forums/

1275 head gasket
https://www.ausmini.com/forums/viewtopic.php?f=2&t=102261
Page 1 of 1

Author:  Goldbrocade_62 [ Tue Apr 09, 2024 4:02 pm ]
Post subject:  1275 head gasket

1275 head gasket what are people using now a friend has had one fail after a couple of months and not many klms done unfortunately I don't know which one the used

Author:  drmini in aust [ Tue Apr 09, 2024 6:21 pm ]
Post subject:  Re: 1275 head gasket

Payen AF470
Retighten when hot and again after 1000km or so.

Author:  Goldbrocade_62 [ Tue Apr 09, 2024 6:53 pm ]
Post subject:  Re: 1275 head gasket

drmini in aust wrote:
Payen AF470
Retighten when hot and again after 1000km or so.

Thank you will pass the information on

Author:  Steam [ Tue Apr 09, 2024 7:16 pm ]
Post subject:  Re: 1275 head gasket

I would suggest finding out why it failed once apart. He may have further issues.

Author:  Goldbrocade_62 [ Wed Apr 10, 2024 12:04 pm ]
Post subject:  Re: 1275 head gasket

Steam wrote:
I would suggest finding out why it failed once apart. He may have further issues.

I'm nots sure what happened was put in a mechani head was redone by a reputable person reco carb block deck checked

Author:  Steam [ Wed Apr 10, 2024 1:54 pm ]
Post subject:  Re: 1275 head gasket

If the timing is out it can cause head gsket issues, and the new chinese distributors are prone to wild timing variations.

Author:  68+86auto [ Wed Apr 10, 2024 4:12 pm ]
Post subject:  Re: 1275 head gasket

Goldbrocade_62 wrote:
Steam wrote:
I would suggest finding out why it failed once apart. He may have further issues.

I'm nots sure what happened was put in a mechani head was redone by a reputable person reco carb block deck checked

unfortunately reputable doesn't mean much. There's one here who can't check dwell at all or even do timing correctly but rebuilds mini engines for people.

Since the block and head was supposedly checked then the gasket itself is unlikely to be at fault.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/