Ausmini
It is currently Sun Apr 28, 2024 2:58 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 8
  [ 113 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next
  Print view Previous topic | Next topic 
Author Message
drmini in aust
PostPosted: Tue Mar 08, 2005 6:56 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
Well it's all going to plan, I've got the 1360 auto block, rods, pistons & cam back, will get S crank back tomorrow. All being well I can start to screw it together this weekend. May be running again by Monday 21st.
Yeehah! :P
Sorry rice dudes.. no turbos, NOS, blowers, stroker cranks etc. It'll be just like before, but with `a bit more' power and a shorter (3.647) diff. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
13secmini
 Post subject:
PostPosted: Tue Mar 08, 2005 7:43 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Mar 21, 2004 10:28 am
Posts: 2452
Location: Wollongong
Any hints on what cam will be used kev?? Ill pop around on monday if im in your area and give you hand if you want. How is barney going now after a couple of weeks of motoring.

_________________
1974 Moke - 998cc
76 Clubman B16a2 Vtec AWD Turbo 12.9@105mph
https://www.youtube.com/watch?v=V9PW49e1hYs
Top
 Profile  
 
kazjim
 Post subject:
PostPosted: Tue Mar 08, 2005 7:51 pm 
Offline
1098cc
1098cc
User avatar

Joined: Tue Apr 06, 2004 2:49 pm
Posts: 1556
Location: Central Coast, NSW
I'm thinking that there will be a "Secret" GR Cam inside....
I'm thinking that the RE-13 has had a lot of developmen, and now its time to get a little more civilised, and even more powerful.... yes Kev ?

hmmmm... i may have to wind some more boost in i think , 73, just aint going to cut it..... :-)

J

_________________
Image
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Tue Mar 08, 2005 8:40 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
Hmm...nice 8)

I think GR has a new cam that's even bigger than the RE-13 ;)

Do you change how much power makes it to the ground when you change gearing at all?

<edit> I'm thinking not..it just maximises the effective use of the power

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484


Last edited by Mini Mad on Tue Mar 08, 2005 8:51 pm, edited 1 time in total.

Top
 Profile  
 
J_A_M
 Post subject:
PostPosted: Tue Mar 08, 2005 8:48 pm 
Offline
1360cc
1360cc

Joined: Tue Mar 16, 2004 11:32 am
Posts: 9068
hehehe....pretty appropriate thread title, with easter coming up and all....


EDIT: Sorry...thought it said resurrection..... :lol:

It is a kinda resurrection anyways......
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 8:56 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
kazjim wrote:
I'm thinking that there will be a "Secret" GR Cam inside....
I'm thinking that the RE-13 has had a lot of developmen, and now its time to get a little more civilised, and even more powerful.... yes Kev ?

hmmmm... i may have to wind some more boost in i think , 73, just aint going to cut it..... :-)

J

Nah don't worry- the cam will be the good old `revised' RE-13, same as Gaf and Mini Mad are running. But I'm using 1.5 rockers for more top end sizzle.
There is a new killer street cam coming but it's not out of gestation yet.

I'll shove one of those in my next motor, which will be a 1430.. 8)

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Tue Mar 08, 2005 9:07 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
Why is it 'revised'?..you'll just be using the same cam? or was your original RE-13 grind different?

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 9:10 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
Mine was different. More top end, but less midrange. Now it's the same as yours.
It'll still have good top end- I've had the die grinder in the head, again... :P

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Mini Mad
 Post subject:
PostPosted: Tue Mar 08, 2005 9:15 pm 
Offline
ET 13.457 seconds , OH YEAH !!!!
User avatar

Joined: Sun Sep 19, 2004 8:35 am
Posts: 7826
Location: Somewhere Around Sydney
Haha, you just can't help yourself can you :lol: Good to see james is keeping you on your toes ;)

_________________
Image
Starlet Conversion:
http://www.ausmini.com/forums/viewtopic.php?t=15484
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Tue Mar 08, 2005 9:17 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
Mini Mad wrote:
Haha, you just can't help yourself can you :lol: Good to see james is keeping you on your toes ;)

My (turbo) head gasket is stronger than HIS (998) head gasket.. :lol:
He can only run so much boost.... I hope! :oops:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Tue Mar 08, 2005 9:56 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Just you just lov it when it starts coming together...
Congrats Kev..and I knew you would have a play with the Head :lol:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
68matic
 Post subject:
PostPosted: Tue Mar 08, 2005 10:18 pm 
Offline
1275cc
1275cc
User avatar

Joined: Tue Mar 16, 2004 9:12 pm
Posts: 5038
Location: cabramatta sydney
i am expecting it will be more impressive than Mini-Ha-Ha pre february 2005?

hey doc, what sparked off his resuscitation?

_________________
Inconspicuously Conspicuous
Appreciation without Depreciation
forever chasing clearer skies...
Top
 Profile  
 
gafmo
 Post subject:
PostPosted: Tue Mar 08, 2005 10:22 pm 
Offline
the King of Bling
User avatar

Joined: Thu Jun 03, 2004 11:11 pm
Posts: 19858
Location: Baulkham Hills
Hay mate are you still going to do the Bench Dyno :arrow:

_________________
Stop Licking the Dog...I Don't Care Who Started It
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Wed Mar 09, 2005 5:50 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
68matic wrote:
i am expecting it will be more impressive than Mini-Ha-Ha pre february 2005?

hey doc, what sparked off his resuscitation?


I was going to go the cheapo route of just replacing his cracked piston and fitting new rings, but by the time I strip it all down it's not worth it.
So I'm building my spare motor to put in, it's now got 1360cc Hypatec pistons, S crank & rods.

The old motor in car might yet get a stroker crank.. and be rebuilt to a 1430... for next time!

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Lillee
 Post subject:
PostPosted: Wed Mar 09, 2005 9:29 am 
Offline
1360cc
1360cc
User avatar

Joined: Tue Jun 01, 2004 3:41 pm
Posts: 6858
Location: Special Tuning Sydney
Mini Ha Ha going faster than it already is! :shock: now that's a scary thought! I'll pop around next weekend for a squiz Kev! Sounds awesome!

_________________
Lillee - 1969 Morris Mini K
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 8
  [ 113 posts ]  Go to page 1, 2, 3, 4, 5 ... 8  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bing [Bot] and 101 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.