Welcome Gazrat...start a thread just for your car and any questions you might have...quote your location so that any help can be targeted

_________________
"Show me the Mini!"

Hi All, I am on the brink of re-entering the mini owner world after a long hiatus. I had a 67 Deluxe when I was a wee lad and looking around for a nice one now. I have found one with a good body, but mechanically below average. Now to decide if I can fix it or not!

Cheers
JD

Mechanical parts are the easy bit! Hope you find a good base for your project!

_________________

Welcome guys!

Glad to have the community grow

Sent from my Pixel 3 XL using Tapatalk

_________________
Build thread for Supercharged 1275 1967 Deluxe Resto
Build thread for Mini ute conversion 998cc Turbo

Thanks. The hydro almost on the bump stops has me the most worried. Everything else I can handle.

I've a deluxe that's been conveyed to rubber cones it's commonly done so I wouldn't let the hydro worry you, as Tim said the body is much harder and more expensive to deal with IMO. You never know it might just need a pump up and that's it...

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss

Put your Location in your profile...then someone way be able to help you with a hydro pump...

_________________
"Show me the Mini!"

Hi guys, been in the group for a little while but not overly active in the past due to other stuff going on. Aquired my '68 Mk1 cooper S a few years ago and drove it for a while to iron out some of the mostly age related mechanical issues. Was originally saphire blue but has been repainted by a previous owner a bright red colour inside and out. Car is in reasonably good condition and doesnt warrant the full strip down that most of you do. The current paint job is quite poor due to a crappy preparation and there are a few rust bubbles to cut out in the usual places. A fire in the boot has made the rear quarter a bare metal respray. So the plan is to prepare the outside for a repaint, staying with the current red n white roof and get it back on the road asap. Starting point is about 3-4 weeks time when current project is completed. I plan on starting a members car page for the resto.

_________________
cheers Ian

Look forward to seeing it What’s the “current project”?

Clip, the current project is jacking up and supporting a load bearing upper floor section of my house to remove and replace a cracked timber beam with a custom made steel universal beam. Be awefully glad when its completed

_________________
cheers Ian

Thanks, I have updated my profile.

I ended up passing on that one. I checked it a little more closely and decided there was just too much to make it drivable for the price they were willing to accept.

Still on the hunt....

Finally found one that ticked all my boxes! Mark 1 Cooper S. Pretty chuffed to pick it up tomorrow.

Hi All!
Im Dono from Chile, but living in Melbourne.
Back home used to have a few Austin Minis, will post some pictures soon. I really want to get the opportunity to restore one mini here, and get more involve in the mini world

Thanks !

Hi Dono.
Fellow Chilean here
What part of Chile are you from? I'm from Santiago; been here 40 or so years. I drive a 77 Clubman.
Good luck with you Mini hunting.

Eiles

Hi Eiles!
I born in Los Angeles, but grew up in Santiago too...
I been here only 4 years so far, but hopefully can stay for many more!.

at the moment im chasing a Clubman!...