ausmini https://www.ausmini.com/forums/ |
|
Clubman floor pans https://www.ausmini.com/forums/viewtopic.php?f=2&t=93608 |
Page 1 of 1 |
Author: | Mike26580 [ Mon Aug 29, 2016 8:02 pm ] |
Post subject: | Clubman floor pans |
Where is everyone getting their rear floorpans from with the hydro lines section in them or what have you done to solve the issue?? |
Author: | simon k [ Wed Aug 31, 2016 3:42 pm ] |
Post subject: | Re: Clubman floor pans |
you'll get a much better response if you put it in the mini chat forum (I've moved it for you) |
Author: | mooman10_0 [ Wed Aug 31, 2016 3:46 pm ] |
Post subject: | Re: Clubman floor pans |
I got some front ones from minisport sa, am guessing they have rear aswell. Cheers, Steve |
Author: | John Smidt [ Wed Aug 31, 2016 4:45 pm ] |
Post subject: | Re: Clubman floor pans |
I anticipate having stocks of the Australian style rear floor repair panels with hydro pipe channels available next Wednesday, and should have them on the website by Thursday so you can see what they look like. These are being made locally. You will need to install the captive nuts for the hydro pipe covers separately as they are not currently part of the repair panel. |
Author: | Scoop [ Wed Aug 31, 2016 6:22 pm ] |
Post subject: | Re: Clubman floor pans |
Good work John. Its been a missing link for the Aussie cars. One of those slight differences between ours and the poms. |
Author: | jubblies [ Wed Aug 31, 2016 7:58 pm ] |
Post subject: | Re: Clubman floor pans |
Sorry for the thread hijack. John Smidt wrote: I anticipate having stocks of the Australian style rear floor repair panels with hydro pipe channels available next Wednesday, and should have them on the website by Thursday so you can see what they look like. These are being made locally. You will need to install the captive nuts for the hydro pipe covers separately as they are not currently part of the repair panel. Hi John, Is this to match the BHM9A & BHM10A front floors? Can you post more details (length, price, etc)? |
Author: | 69k1100 [ Thu Sep 01, 2016 10:24 am ] |
Post subject: | Re: Clubman floor pans |
Hi John, Will the pressings go back as far as the heel board or will we have to graft on that secrion, and will it include the bosses for the captive nuts to weld up to? Basically what I am asking is are they pressings that match the old pans or are they press bent sheet? Or rolled? |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |