Hello - just got my mini back together and I get a squeaking at very low speed when the car coasts in neutral at very low speed - no sounds when in gear????

Any ideas

When you say noise goes away 'in gear', is that just in a gear or is it with drive being applied? Like radiator cowl rubbing on body.
Is the noise in time with engine revs, wheel revolutions or with suspension movement - like a CV boot or clip rubbing or a dry suspension cup?

engine off, clutch in, gear selected, squeak?

_________________
did I tell you that I won a trophy?

Thanks for those suggestions - car is currently back for a final wet polish I will check out those suggestion when I get it back.

Wheels scrubbing on guard or inner wheel arch on rear?

_________________
Lillee - 1969 Morris Mini K

Thanks again
Car back and I can confirm the noise disappears when the the gear is engagedand in drive . Definitely not wheels scrubbing on the bodywork and definetly from the front not the back ???

Is your car Auto or Manual?

Manual

Lucky bugger, I wish I ONLY had a front end squeak

_________________
Find a job you love and you will never have to go to work !

Again, is the squeak in time with the engine, wheel rotation, suspension movement or random?

Definetly in time with wheel rotation !

Tightened up the hub nuts to the next hole for the split pin and problem solved
Thanks for all the suggestions.

So pleased you found the problem because that wasn't very high on my list of next suggestions.

Good...I would also make sure the hub is packed correctly with the right grease...if it can squeal with one castellation backed off...it may have also overheated a bearing...

_________________
"Show me the Mini!"

This

_________________
Lillee - 1969 Morris Mini K