ausmini https://www.ausmini.com/forums/ |
|
Mark 1 Flares https://www.ausmini.com/forums/viewtopic.php?f=2&t=96031 |
Page 1 of 1 |
Author: | glenndunn [ Wed Sep 13, 2017 8:00 am ] |
Post subject: | Mark 1 Flares |
Hi Everyone. I'm hoping to find out if a 1967 Cooper S had flares fitted from fractory or not as I'm doing a resto on my S and I want it to restore it as it came from the factory, it has these flares on it now because it has Contessa mags on now but I'm putting standard Cooper S steel rims back on. Thanks in advance |
Author: | cooperess [ Wed Sep 13, 2017 8:10 am ] |
Post subject: | Re: Mark 1 Flares |
Only in South Australia I think and your flares look like after market and are wider. |
Author: | winabbey [ Wed Sep 13, 2017 9:58 am ] |
Post subject: | Re: Mark 1 Flares |
cooperess wrote: Only in South Australia I think and your flares look like after market and are wider. ... and only very late in Mark 1 production were they fitted by S.A. dealers. From the factory your car didn't come with flares. |
Author: | glenndunn [ Wed Sep 13, 2017 12:46 pm ] |
Post subject: | Re: Mark 1 Flares |
Thanks for that I have seen them with smaller flares fitted and they seem to be moulded into the guard, are they after market as well ? |
Author: | timmy201 [ Wed Sep 13, 2017 1:01 pm ] |
Post subject: | Re: Mark 1 Flares |
The factory Cooper S type are remade by minikingdom. I don't know of any other factory fitted flares for Aussie round nose minis https://minikingdomonline.com.au/produc ... -set-of-4/ |
Author: | Goldbrocade_62 [ Wed Sep 13, 2017 1:19 pm ] |
Post subject: | Re: Mark 1 Flares |
What about the missing seams |
Author: | peterb [ Wed Sep 13, 2017 6:11 pm ] |
Post subject: | Re: Mark 1 Flares |
Goldbrocade_62 wrote: What about the missing seams Seams they're missing. Could be bit of filler under that paint. |
Author: | Goldbrocade_62 [ Wed Sep 13, 2017 7:52 pm ] |
Post subject: | Re: Mark 1 Flares |
peterb wrote: Goldbrocade_62 wrote: What about the missing seams Seams they're missing. Could be bit of filler under that paint. Big job to reinstall |
Author: | glenndunn [ Fri Sep 15, 2017 7:54 am ] |
Post subject: | Re: Mark 1 Flares |
Yes What they did back in the 70's, it will be a big job just have to strip the body and see what we have |
Author: | low n blown [ Sat Sep 16, 2017 6:46 am ] |
Post subject: | Re: Mark 1 Flares |
I'll tell you whats under there.... Warped sheet metal and bog. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |