ausmini https://www.ausmini.com/forums/ |
|
Quality Carpet Set https://www.ausmini.com/forums/viewtopic.php?f=2&t=96170 |
Page 2 of 3 |
Author: | i got a mini [ Wed Nov 15, 2017 2:45 pm ] |
Post subject: | Re: Quality Carpet Set |
heheheh |
Author: | Minicooper4me [ Wed Nov 15, 2017 9:20 pm ] |
Post subject: | Re: Quality Carpet Set |
Hobson wrote: i got a mini wrote: looks like you back mats are in the wrong way are they meant to curve around the bin at the back if that makes sense.??? DERP Yep, arse about. |
Author: | goodie [ Thu Nov 16, 2017 7:11 am ] |
Post subject: | Re: Quality Carpet Set |
It's like a cryptic puzzle trying to work out which way they are meant to sit ,i've looked at it 3 times now . Swap em over and rotate them i/4 of a turn so that the longer piece wraps around the front of the bin ( i think that's right ). |
Author: | Bill B [ Thu Nov 16, 2017 9:37 am ] |
Post subject: | Re: Quality Carpet Set |
The retail cost of the Tretford Westminster carpet alone is over $400 incl p&p & GST |
Author: | cooperess [ Thu Nov 16, 2017 10:52 am ] |
Post subject: | Re: Quality Carpet Set |
Bill B wrote: The retail cost of the Tretford Westminster carpet alone is over $400 incl p&p & GST Just wondering where you get it from. |
Author: | Bill B [ Thu Nov 16, 2017 6:11 pm ] |
Post subject: | Re: Quality Carpet Set |
The Westminster style carpet made by "Tretford" I bought from Gibbon Group P/L in QLD. www.gibbongroup.com.au It comes in a range of colours that suit minis. When I contacted them (2 years ago) they sent sample pieces in the colour range I wanted to choose my preference. They were happy to talk to phone enquiries. |
Author: | cruiser23 [ Tue Dec 05, 2017 8:09 pm ] |
Post subject: | Re: Quality Carpet Set |
Carpet turned up late last week. The quality is excellent, well cut, nice binding on visible edges. All Car Carpets were very good to deal with. I hope it fits as well as it looks but probably wont be able to get to it this side of Xmas. I will update the post again once it is in the car. Not sure why they didn't cut the hole for the gear stick. Does the position vary between years/models? |
Author: | gtogreen1969 [ Tue Dec 05, 2017 8:27 pm ] |
Post subject: | Re: Quality Carpet Set |
cruiser23 wrote: Carpet turned up late last week. The quality is excellent, well cut, nice binding on visible edges. All Car Carpets were very good to deal with. I hope it fits as well as it looks but probably wont be able to get to it this side of Xmas. I will update the post again once it is in the car. Not sure why they didn't cut the hole for the gear stick. Does the position vary between years/models? Bit odd they forgot the Steering Column, Gearlever and High beam dipper holes. They should be in the same spot for all the Cooper S range. There are some good photos and some measurements in this thread of an original carpet set. viewtopic.php?f=9&t=83482&p=922960 Attachment: dsc00434.jpg Attachment: dsc00436.jpg Attachment: dsc00437.jpg Attachment: dsc00438.jpg
|
Author: | timmy201 [ Wed Dec 06, 2017 1:09 pm ] |
Post subject: | Re: Quality Carpet Set |
It's pretty normal for the sets to come uncut. The Cooper S would all have had the holes in the same spots, however if you wanted to fit the same set to another car there is a bit of variation. Magic wand/remote/rod change Floor starter button Dip switch on floor or column |
Author: | gtogreen1969 [ Wed Dec 06, 2017 4:11 pm ] |
Post subject: | Re: Quality Carpet Set |
timmy201 wrote: It's pretty normal for the sets to come uncut. The Cooper S would all have had the holes in the same spots, however if you wanted to fit the same set to another car there is a bit of variation. I can understand his dissapointment. If i was purchasing this https://m.ebay.com.au/itm/Morris-Mini-C ... mwBanner=1 then i would expect it to be ready to go for a Mk1S. If you have a different model then that is when you contact them to ask for a blank set.
Magic wand/remote/rod change Floor starter button Dip switch on floor or column |
Author: | phillb [ Wed Dec 06, 2017 4:35 pm ] |
Post subject: | Re: Quality Carpet Set |
I guess at least you can ensure the gear hole and hibeam hole are in the right spot. With the cost of that carpet just make sure you “measure twice cut once” When comparing measurements to old carpet bear in mind that the old carpets sometimes shrink Mine has shrunk enough that there is a 2-3cm gap around the edge. Would almost be worth removing the gear lever to make it easier to position with just the boot. The gear lever hole is normally a circular hole that is a neat fit around the round part of the rubber boot. Looks really nicely made. I was thinking of getting some mats done in the red Westminster to protect my original carpet. |
Author: | cruiser23 [ Wed Dec 06, 2017 8:27 pm ] |
Post subject: | Re: Quality Carpet Set |
I don't have the original carpets to lead me astray. I'll definitely be measuring twice before cutting. I'm not too concerned with having to add the holes, hopefully I'll get them close to the right place. |
Author: | winabbey [ Thu Dec 07, 2017 5:58 am ] |
Post subject: | Re: Quality Carpet Set |
cruiser23 wrote: I don't have the original carpets to lead me astray. I'll definitely be measuring twice before cutting. I'm not too concerned with having to add the holes, hopefully I'll get them close to the right place. If you PM me your email address I can send you exact measurements of where the gearshift and floor dip-switch holes need to be cut. |
Author: | timmy201 [ Fri Dec 08, 2017 8:34 am ] |
Post subject: | Re: Quality Carpet Set |
gtogreen1969 wrote: timmy201 wrote: It's pretty normal for the sets to come uncut. The Cooper S would all have had the holes in the same spots, however if you wanted to fit the same set to another car there is a bit of variation. I can understand his dissapointment. If i was purchasing this https://m.ebay.com.au/itm/Morris-Mini-C ... mwBanner=1 then i would expect it to be ready to go for a Mk1S. If you have a different model then that is when you contact them to ask for a blank set.Magic wand/remote/rod change Floor starter button Dip switch on floor or column I’m not saying it’s ideal, it’s just that most places are the same. I’m not sure how large the market is for Australian Mk1 Cooper S carpets but at least it’s nice to have a couple of places that do them The minisport set has the cutout for the steering column but not the dipswitch or gearshift from these photos http://minisport.com.au/mini-cooper-s-c ... edarussett |
Author: | DavidE [ Fri Dec 08, 2017 9:02 am ] |
Post subject: | Re: Quality Carpet Set |
timmy201 wrote: gtogreen1969 wrote: timmy201 wrote: It's pretty normal for the sets to come uncut. The Cooper S would all have had the holes in the same spots, however if you wanted to fit the same set to another car there is a bit of variation. I can understand his dissapointment. If i was purchasing this https://m.ebay.com.au/itm/Morris-Mini-C ... mwBanner=1 then i would expect it to be ready to go for a Mk1S. If you have a different model then that is when you contact them to ask for a blank set.Magic wand/remote/rod change Floor starter button Dip switch on floor or column I’m not saying it’s ideal, it’s just that most places are the same. I’m not sure how large the market is for Australian Mk1 Cooper S carpets but at least it’s nice to have a couple of places that do them The minisport set has the cutout for the steering column but not the dipswitch or gearshift from these photos http://minisport.com.au/mini-cooper-s-c ... edarussett and no wear pads for the seat frame on the rear floor section! |
Page 2 of 3 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |