ausmini https://www.ausmini.com/forums/ |
|
rust prevention https://www.ausmini.com/forums/viewtopic.php?f=2&t=96308 |
Page 1 of 1 |
Author: | mark2man [ Wed Nov 15, 2017 4:58 pm ] |
Post subject: | rust prevention |
Hi guys,whats the best rust prevention product to spray inside the sill panels and other cavities. |
Author: | peterb [ Wed Nov 15, 2017 5:29 pm ] |
Post subject: | Re: rust prevention |
Valvolene Tectyl |
Author: | man+van [ Wed Nov 15, 2017 5:57 pm ] |
Post subject: | Re: rust prevention |
I use the old fish oil or Lanotec. Use both these on my 4wd as well and does well. |
Author: | p7676 [ Wed Nov 15, 2017 7:18 pm ] |
Post subject: | Re: rust prevention |
cavity wax pressure pack can with the long flexible tube and 4 way spray at the end, |
Author: | milano [ Fri Nov 24, 2017 10:00 am ] |
Post subject: | Re: rust prevention |
Fergusons Knock-out rust, very good for penetrating & rust hunting,and that is what it does, trying on old MG chassis outside, has converted the rust, & still looking good, smells the same as Valvoline Tectrol, I used years ago, but available in pressure cans ,Super Cheap, Repco etc. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |