Bill B wrote:
I usually use a 6 foot pry bar and a friend to hold the box down.
I was wondering why you mainly have obese friends.
| ausmini https://www.ausmini.com/forums/ |
|
| Gearbox Nut Removal https://www.ausmini.com/forums/viewtopic.php?f=2&t=96833 |
Page 1 of 1 |
| Author: | cooperess [ Sat Feb 17, 2018 1:06 pm ] |
| Post subject: | Gearbox Nut Removal |
Attachment: Mini Gear Box Nut Removal.jpg This is how I do it.
|
|
| Author: | simon k [ Sat Feb 17, 2018 2:19 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
scary as f*ck that one... I didn't know which gears to lock together the first time I did it, so picked 2nd and 3rd... crack... 1st and 4th everyone, 1st and 4th |
|
| Author: | cooperess [ Sat Feb 17, 2018 2:45 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
Pretty sure all the books say lock 1st & 4th |
|
| Author: | Goldbrocade_62 [ Sat Feb 17, 2018 4:53 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
I just think poor floorpan lol |
|
| Author: | Bill B [ Sat Feb 17, 2018 5:51 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
There is a warning on Mini Spares website that some Haynes (mostly UK) manuals quote locking 2 and 4 and should be 1 and 4 as above. I usually use a 6 foot pry bar and a friend to hold the box down. |
|
| Author: | simon k [ Sat Feb 17, 2018 5:51 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
cooperess wrote: Pretty sure all the books say lock 1st & 4th yeah... the one time I don't look at the book... |
|
| Author: | winabbey [ Sat Feb 17, 2018 5:53 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
Bill B wrote: I usually use a 6 foot pry bar and a friend to hold the box down. I was wondering why you mainly have obese friends.
|
|
| Author: | Ian_B [ Sat Feb 17, 2018 6:01 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
This is getting personal Golden boy reckons im obese too .Was a good trip this morning until I was picked on while driving  Something about uneven weight distribution |
|
| Author: | Goldbrocade_62 [ Sat Feb 17, 2018 7:51 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
Ian_B wrote: This is getting personal Golden boy reckons im obese too .Was a good trip this morning until I was picked on while driving Something about uneven weight distribution I noticed that the vanny the right hand corners was better maybe sumthin with the weight distribution left handers there wasn't enough lock 
|
|
| Author: | Ian_B [ Sat Feb 17, 2018 9:22 pm ] |
| Post subject: | Re: Gearbox Nut Removal |
Some of those hairpins were bloody scarey but worth it all to get a virgin 1100s block. I will leave it sit for when my stroker craps itself |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|