Ausmini
It is currently Sun Sep 23, 2018 8:46 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Sat Feb 17, 2018 1:08 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 478
Location: Brandy Hill, NSW
Attachment:
Mini Gear Box Nut Removal 001.jpg
How does one remove this bearing without wrecking it like I have.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 1:37 pm 
Offline
848cc
848cc

Joined: Fri Jul 21, 2017 1:14 pm
Posts: 176
Location: Branxton, NSW
I would assume use a suitable puller, its a need roller yes?

_________________
1972 UK built Mk3 mini with 1098cc engine


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 2:17 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15007
Location: Wodonga - Vic/NSW border
I have a little 3 leg puller I use - I think I had to grind the feet a little thinner to get between the ring and the nut, but that's the way I do it...

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 2:18 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 478
Location: Brandy Hill, NSW
hpal wrote:
I would assume use a suitable puller, its a need roller yes?
It was until I broke the cage and the needles dropped out.


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 2:22 pm 
Offline
998cc
998cc

Joined: Fri Aug 30, 2013 8:59 pm
Posts: 866
Location: Western Sydney
Attachment:
IMG_3830.JPG

I made one of these from a piece of 50mm square tube.


You do not have the required permissions to view the files attached to this post.

_________________
Find a job you love and you will never have to go to work !


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 2:23 pm 
Offline
848cc
848cc

Joined: Thu Sep 17, 2015 9:25 pm
Posts: 24
Location: Brisbane
Have used a small 2 jaw puller.
Or read this;
http://www.ausmini.com/forums/viewtopic.php?f=25&t=66729
Attachment:
puller.JPG


Sorry, too late.


You do not have the required permissions to view the files attached to this post.

_________________
2 X 1970 MK II Cooper S - under resto
1963 Triumph Spitfire
1982 RX-7 Series 2


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 8:27 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri Oct 20, 2006 5:03 pm
Posts: 2636
Location: Out in the shed cleaning up my own mess.
Removing the bearing from the shaft is easy. Removing the outer shell from the transmission casing is much more fun (which you will now need to do since you've totalled the inner part! :evil:

_________________
1967 Cooper S - ready for reg.
1965 Cooper S shell - all painted up, ready for fit out (Yesss!)
1964 Mark II Jaguar - Exhaust leak to fix (worry,worry!)
1972 Jag XJ6 - Bought wearing rose coloured glasses!


Top
 Profile  
 
PostPosted: Sat Feb 17, 2018 8:41 pm 
Offline
848cc
848cc
User avatar

Joined: Wed Sep 30, 2015 9:38 am
Posts: 478
Location: Brandy Hill, NSW
Thanks for your guys.


Top
 Profile  
 
PostPosted: Sun Feb 18, 2018 6:55 am 
Offline
1098cc
1098cc

Joined: Sat Jul 23, 2011 8:17 am
Posts: 1939
Location: san remo nsw
AEG163job wrote:
Removing the bearing from the shaft is easy. Removing the outer shell from the transmission casing is much more fun (which you will now need to do since you've totalled the inner part! :evil:


Easy. Just run a weld around inside of shell, it'll just fall out......into the trash.


Top
 Profile  
 
PostPosted: Fri Feb 23, 2018 5:51 pm 
Offline
1098cc
1098cc
User avatar

Joined: Sun Feb 20, 2005 8:11 pm
Posts: 1295
Location: Wellington,
cgo wrote:
Have used a small 2 jaw puller.
Or read this;
http://www.ausmini.com/forums/viewtopic.php?f=25&t=66729
Attachment:
puller.JPG


Sorry, too late.


Nice to see my link in use,
Pitty about photobucket issues


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: Bill B, Lyddo, Pug205t16, timmy201 and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.