Neat!
| ausmini https://www.ausmini.com/forums/ |
|
| Mini engine stand mount https://www.ausmini.com/forums/viewtopic.php?f=2&t=96863 |
Page 1 of 1 |
| Author: | Resto-nut [ Thu Feb 22, 2018 8:12 am ] |
| Post subject: | Mini engine stand mount |
Hi guys Just thought I’d share a new product ( admin please delete or move if in the wrong location) For those who wish or have tried to mount there engine on a traditional engine stand we have developed an adaptor to make life a lot easier This adapter replaces the traditional pivot tube and mounting fingers with a one piece unit that bolts to the engine via the oil filter mounts and the alternator / generator mounts It has been designed to fit both A and A+ series engines There are a couple of retailers selling them ( not sure if I’m allowed to mention names so I won’t) Msg me for details Not sure how to post pics sorry |
|
| Author: | winabbey [ Thu Feb 22, 2018 12:16 pm ] |
| Post subject: | Re: Mini engine stand mount |
Feel free to provide details of this useful tool, including sources for purchase and photos. |
|
| Author: | Resto-nut [ Fri Feb 23, 2018 7:25 am ] |
| Post subject: | Re: Mini engine stand mount |
How do you post pics |
|
| Author: | winabbey [ Fri Feb 23, 2018 8:42 am ] |
| Post subject: | Re: Mini engine stand mount |
This is in the How To folder. viewtopic.php?f=25&t=96873 |
|
| Author: | Resto-nut [ Sat Feb 24, 2018 6:50 pm ] |
| Post subject: | Re: Mini engine stand mount |
Thanks Guys The mount ( blue part) Are available ether directly form me or through Mini's Plus in Vic ( 03 9729 1323) They fit both A & A+ Series engines and come with all the hardware required The Pivot tube is 60mm and fits all the engine stands we have tried so far Made in Australia Powder Coated The pics show the mounting setup for both A & A+ makes life So much easier when rebuilding your engine and gearbox Cheers Sash |
|
| Author: | Resto-nut [ Wed Apr 11, 2018 10:19 pm ] |
| Post subject: | Re: Mini engine stand mount |
Just to let you all know The stands are Now available at Mini sport in SA |
|
| Author: | Besser [ Mon Apr 16, 2018 10:50 am ] |
| Post subject: | Re: Mini engine stand mount |
Nice job, let me suggest version2 has bolt retention washers so they never ever get separated. I'm still looking for my long bolts for the std engine stand and fear they're holding the kids swing together. |
|
| Author: | Soldar [ Wed May 22, 2019 10:18 pm ] |
| Post subject: | Re: Mini engine stand mount |
Oldish thread but how have people been mounting the engines so that the front of the engine is accessible? Ie is there a similar adaptor that goes on the exhaust stubs or somewhere? |
|
| Author: | 9YaTaH [ Thu May 23, 2019 7:05 am ] |
| Post subject: | Re: Mini engine stand mount |
Neat!
|
|
| Author: | timmy201 [ Thu May 23, 2019 8:37 am ] |
| Post subject: | Re: Mini engine stand mount |
I think you would just leave all the front accessories until it’s off the stand and on the floor or in the car? |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|