ausmini https://www.ausmini.com/forums/ |
|
Mk 1 number plate lights https://www.ausmini.com/forums/viewtopic.php?f=2&t=97109 |
Page 1 of 1 |
Author: | deluxe67 [ Thu Apr 19, 2018 6:52 pm ] |
Post subject: | Mk 1 number plate lights |
I'm only getting 10.5 Volts. Is that normal? Seems like a big voltage drop? Ironic it's so close physically to the battery but I guess so far away via the fuse box... |
Author: | AEG163job [ Thu Apr 19, 2018 10:00 pm ] |
Post subject: | Re: Mk 1 number plate lights |
Poor earth connection or resistance somewhere in the live feed. Take a reading at the bullet connectors in the boot for starters. |
Author: | drmini in aust [ Fri Apr 20, 2018 5:30 am ] |
Post subject: | Re: Mk 1 number plate lights |
If you don't have a headlamp relay the current draw through the switch can pull the voltage down on all the lights. Worth adding one... |
Author: | deluxe67 [ Fri Apr 20, 2018 12:19 pm ] |
Post subject: | Re: Mk 1 number plate lights |
Sorted. Getting 12.5V now. Issue was the bullet connector in the boot..... |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |