| ausmini https://www.ausmini.com/forums/ |
|
| Timing Chains and Sprockets https://www.ausmini.com/forums/viewtopic.php?f=2&t=97253 |
Page 1 of 1 |
| Author: | kiwiinwgtn [ Fri May 25, 2018 9:17 pm ] |
| Post subject: | Timing Chains and Sprockets |
Hi what brands are people using for timing chains and sprockets these days. Prefer adjustable Thanks Kiwiinwgtn |
|
| Author: | mickmini [ Fri May 25, 2018 10:34 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
i have a MED vernier one. Nice bit of gear. Can't remember the brand of chain but seem to recall it being German. |
|
| Author: | rodmac [ Fri May 25, 2018 10:51 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
Iwis chains seem to be highly regarded |
|
| Author: | simon k [ Tue May 29, 2018 12:40 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
I use the rollmaster adjustable set - cheap, adjusts to where the cam is meant to go, turns the cam |
|
| Author: | kiwiinwgtn [ Tue May 29, 2018 8:02 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
simon k wrote: I use the rollmaster adjustable set - cheap, adjusts to where the cam is meant to go, turns the cam where can you purchase a rollmaster set. ta KiwiinwgtnSent from my SM-J530Y using Tapatalk |
|
| Author: | simon k [ Tue May 29, 2018 10:24 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
kiwiinwgtn wrote: simon k wrote: I use the rollmaster adjustable set - cheap, adjusts to where the cam is meant to go, turns the cam where can you purchase a rollmaster set. ta Kiwiinwgtnjust about anywhere... price for the same thing varies from  to  http://minisport.com.au/mini-rollmaster ... d-sprocket https://www.ebay.com.au/itm/BMC-Morris- ... .l4275.c10 seems like it comes with an IWIS chain... |
|
| Author: | drmini in aust [ Wed May 30, 2018 12:57 am ] |
| Post subject: | Re: Timing Chains and Sprockets |
I found the rollmaster keyways confusing, I used an offset cam key instead. |
|
| Author: | Scoop [ Wed May 30, 2018 9:20 am ] |
| Post subject: | Re: Timing Chains and Sprockets |
There is a nice How To on here for the rollmaster. I have used them a few times, good once you get your head around all the slots!! |
|
| Author: | Ian_B [ Fri Jun 01, 2018 8:49 pm ] |
| Post subject: | Re: Timing Chains and Sprockets |
Rollmaster done my head in until I finally worked it out .They dont supply good enough instructions but they are a good set and are available for tunnel bored blocks. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|