ausmini https://www.ausmini.com/forums/ |
|
Mini C.S oil cooler clearance. https://www.ausmini.com/forums/viewtopic.php?f=2&t=97278 |
Page 1 of 1 |
Author: | p7676 [ Wed May 30, 2018 5:16 pm ] |
Post subject: | Mini C.S oil cooler clearance. |
Hello All , Is 2mm enough clearance between the oil cooler and the starter motor ? Allen |
Author: | justfanginaround [ Wed May 30, 2018 7:11 pm ] |
Post subject: | Re: Mini C.S oil cooler clearance. |
with a solid mounted power unit it is but with rubber mounts that will degrade soon after fitting no. |
Author: | gtogreen1969 [ Wed May 30, 2018 8:18 pm ] |
Post subject: | Re: Mini C.S oil cooler clearance. |
Place it in gear and rock it back and forth to check the clearance. My oil cooler has about a 5mm gap between the starter motor and about a 2mm between the grill. Attachment: Starter motor to Oil cooler gap.jpg
|
Author: | Convertible Mini [ Thu May 31, 2018 7:16 pm ] |
Post subject: | Re: Mini C.S oil cooler clearance. |
No that is not enough Gap. You need one of my Bosch Planetary geared starters. They are more Slimline. Besides much more powerful. |
Author: | Ian_B [ Thu May 31, 2018 7:31 pm ] |
Post subject: | Re: Mini C.S oil cooler clearance. |
I wouldnt use a gemini one on a cooper s but i bought one today for 50 bucks Original non China. My Cooper S has Lucas original and oil cooler and it all fits Is Bosch still who they once were or are they just a name now? |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |