| ausmini https://www.ausmini.com/forums/ |
|
| How to get these out... https://www.ausmini.com/forums/viewtopic.php?f=2&t=97329 |
Page 1 of 1 |
| Author: | zulu_warrior1976 [ Wed Jun 06, 2018 10:28 pm ] |
| Post subject: | How to get these out... |
Hi All, Spent some time tonight with the old man stripping the front subframe from the mini k. I want to convert the car from hydrolastic to dry suspension. Anyone know how to get these out?? Attachment: IMG_4001.JPG  Sent from my iPhone using Tapatalk |
|
| Author: | Mick [ Wed Jun 06, 2018 10:59 pm ] |
| Post subject: | Re: How to get these out... |
Give them a twist. They're just seated in there. There is a bracket held in by two Phillips screws which have to be removed as well. |
|
| Author: | Bill B [ Thu Jun 07, 2018 9:52 am ] |
| Post subject: | Re: How to get these out... |
As Mick said they twist - anticlockwise - just like a bayonet light globe. I think the bracket has to come out first. The displacer might need a light tap to break the rust. I also remember wrapping something like an old fan felt around it held with vice-grips to get better grip. If you don't damage them they should be worth something. |
|
| Author: | simon k [ Thu Jun 07, 2018 1:37 pm ] |
| Post subject: | Re: How to get these out... |
the bracket with screws is visible in the first photo - rustier than all of the gunk around it don't throw the bags away, someone will appreciate them |
|
| Author: | zulu_warrior1976 [ Mon Jun 18, 2018 8:57 am ] |
| Post subject: | Re: How to get these out... |
Couple of love taps with a hammer. Loads of lannox and a counter clockwise turn and out they came! Solid advice team. Many thanks. Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|