ausmini https://www.ausmini.com/forums/ |
|
Door Check Straps https://www.ausmini.com/forums/viewtopic.php?f=2&t=97356 |
Page 2 of 2 |
Author: | winabbey [ Fri Jun 15, 2018 8:32 pm ] |
Post subject: | Re: Door Check Straps |
cruiser23 wrote: Doug, by the look of your photo the ends are doubled up, presumably for added strength at the bolt holes? Yes, that's right. |
Author: | Bill B [ Sat Jun 16, 2018 6:13 pm ] |
Post subject: | Re: Door Check Straps |
On mine, both ends are doubled over for extra grip. The body side has a pressed metal plate to cover the doubled thickness of webbing, using 2 countersunk screws. The door side is also doubled and uses a thick, flat bar and a round pin to hold the doubled webbing to the door. In Doug's photos, you can't see the flat bar and pin as the webbing covers it. |
Author: | winabbey [ Sat Jun 16, 2018 6:25 pm ] |
Post subject: | Re: Door Check Straps |
Bill B wrote: The door side is also doubled and uses a thick, flat bar and a round pin to hold the doubled webbing to the door. In Doug's photos, you can't see the flat bar and pin as the webbing covers it. Like this ... Attachment: Door Check Strap 50mm 2 inches B.jpg
|
Page 2 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |