From memory, mine was supplied oversize (not a MK item) and took some fettling to achieve the desired fit. I concentrated on getting it to fit properly inside the middle slot (the section above the switch panel, and at the curved ends, then just folded the excess up against the firewall and into the front rail. I think a bit of cutting was required. BTW, this was all done prior to fitting the firewall side panels.
_________________ 1967 Cooper S - new front bearings to do. 1965 Cooper S shell - all painted up, ready for fit out. 1969 Cooper S Mk2 - claimed by 2nd. born 1966 Deluxe- next rustoration! Mk 2 & XJ6 Jags. Less said the better.
|