ausmini https://www.ausmini.com/forums/ |
|
Simple answers for confused people thread https://www.ausmini.com/forums/viewtopic.php?f=2&t=97660 |
Page 4 of 4 |
Author: | hpal [ Thu Oct 04, 2018 5:16 pm ] |
Post subject: | Re: Simple answers for confused people thread |
https://www.ebay.co.uk/itm/Powerspark-Electronic-Distributor-for-MGB-MGB-GT-replaces-Lucas-45D-and-25D/121014415140?epid=28021593763&hash=item1c2d056f24:g:sHgAAOSwny1ajzn- Something like this is a good price new as well. |
Author: | mattywood [ Sat Oct 13, 2018 12:39 pm ] |
Post subject: | Re: Simple answers for confused people thread |
Anyone know how many tapered spacers are needed for the door hinges? Sent from my iPhone using Tapatalk |
Author: | MiniMat [ Sat Oct 13, 2018 2:22 pm ] |
Post subject: | Re: Simple answers for confused people thread |
2 tapered washers for the top hinge. So 4 required per car |
Author: | winabbey [ Sat Oct 13, 2018 2:59 pm ] |
Post subject: | Re: Simple answers for confused people thread |
mattywood wrote: Anyone know how many tapered spacers are needed for the door hinges? http://ausmini.com/forums/viewtopic.php?f=2&t=93191 |
Author: | mattywood [ Sat Oct 13, 2018 6:58 pm ] |
Post subject: | Re: Simple answers for confused people thread |
Thanks for also for the extra link. Just what I need. Sent from my iPhone using Tapatalk |
Author: | hpal [ Mon Apr 13, 2020 9:39 pm ] |
Post subject: | Re: Simple answers for confused people thread |
What do the orange lights on the left and right do? Thanks |
Author: | gtogreen1969 [ Mon Apr 13, 2020 10:20 pm ] |
Post subject: | Re: Simple answers for confused people thread |
hpal wrote: What do the orange lights on the left and right do? Thanks Low oil pressure and Oil filter bypass. On the Cooper S they only used the oil filter warning, but it was disconnected in late 1968. |
Author: | hpal [ Tue Apr 14, 2020 8:02 am ] |
Post subject: | Re: Simple answers for confused people thread |
Thanks. Pretty sure there’s no sensors on my car for these. It’s has an oil pressure gauge instead of the switch. |
Author: | mattywood [ Wed May 13, 2020 4:06 pm ] |
Post subject: | Re: Simple answers for confused people thread |
I’m think about getting a 123 or csi dizzy. They sell vacuum advance and non vacuum advance. As the advance is set by the programme I assume the only difference is how they look externally. Am I correct or off the mark? Sent from my iPhone using Tapatalk |
Author: | timmy201 [ Wed May 13, 2020 5:28 pm ] |
Post subject: | Re: Simple answers for confused people thread |
The vacuum normally works in addition to any other advance. The plate inside with the points/ignition rotates when the vacuum advance is added The 123 manual says 0 to 14 degrees more advance when vac goes from 5 to 10 inHg |
Author: | mattywood [ Wed May 13, 2020 7:24 pm ] |
Post subject: | Re: Simple answers for confused people thread |
Thanks so yes I need a vac advance one if I have vac advance now? Sent from my iPhone using Tapatalk |
Author: | mattywood [ Wed May 13, 2020 8:52 pm ] |
Post subject: | Re: Simple answers for confused people thread |
It’s a new build with a hif44 which I believe uses vac advance so from what you said look like I should by a vac advance one Sent from my iPhone using Tapatalk |
Author: | timmy201 [ Wed May 13, 2020 9:13 pm ] |
Post subject: | Re: Simple answers for confused people thread |
Well it’s up to you. It adds extra advance at part throttle and can help with fuel economy. The Cooper S never had it |
Author: | mattywood [ Wed May 13, 2020 9:18 pm ] |
Post subject: | Re: Simple answers for confused people thread |
Thanks for the help Sent from my iPhone using Tapatalk |
Page 4 of 4 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |