ausmini https://www.ausmini.com/forums/ |
|
7.5 disc brake https://www.ausmini.com/forums/viewtopic.php?f=2&t=97787 |
Page 1 of 1 |
Author: | sako [ Sat Sep 22, 2018 7:52 pm ] |
Post subject: | 7.5 disc brake |
Hi guys, I currently have 8.4 discs and am wanting to fit 10 inch wheels, does anyone have any feedback on the following conversion, quality, performance etc... http://minisport.com.au/mini-brake-conv ... s-calipers Thanks, |
Author: | timmy201 [ Sat Sep 22, 2018 9:05 pm ] |
Post subject: | Re: 7.5 disc brake |
They've sold hundreds of them in the UK and I've never heard of any issues with them. It'd be worth checking your wheel bearings too, its a great time to change them if you have them all apart. |
Author: | DavidE [ Sun Sep 23, 2018 7:33 am ] |
Post subject: | Re: 7.5 disc brake |
timmy201 wrote: They've sold hundreds of them in the UK and I've never heard of any issues with them. It'd be worth checking your wheel bearings too, its a great time to change them if you have them all apart. Mini spares have had quality problems recently with drive adapters, and (not included in this kit) the hubs. Better quality replacements were shipped to me foc. |
Author: | 9YaTaH [ Sun Sep 23, 2018 11:53 am ] |
Post subject: | Re: 7.5 disc brake |
Believe you can also have your 8.4s machined down without too much trouble... |
Author: | sako [ Sun Sep 23, 2018 12:21 pm ] |
Post subject: | Re: 7.5 disc brake |
Yeah I had read about machineing down the 8.4’s, I don’t have the equipment to do this though. Thanks |
Author: | Phil 850 [ Sun Sep 23, 2018 4:51 pm ] |
Post subject: | Re: 7.5 disc brake |
9YaTaH wrote: Believe you can also have your 8.4s machined down without too much trouble... Don't you have to move the caliber as well, or do the original calipers then fit ? |
Author: | 9YaTaH [ Sun Sep 23, 2018 6:48 pm ] |
Post subject: | Re: 7.5 disc brake |
sako wrote: Yeah I had read about machineing down the 8.4’s, I don’t have the equipment to do this though. Thanks Ummmmmmmmmmm...there's others what do though... |
Author: | sako [ Sun Sep 23, 2018 7:00 pm ] |
Post subject: | Re: 7.5 disc brake |
Any recommendations??? |
Author: | Matt I [ Mon Sep 24, 2018 9:50 am ] |
Post subject: | Re: 7.5 disc brake |
It is possible to machine the vented 8.4" discs and use aftermarket 4 pot calipers to make 7.9" sets that fit under 10" wheels, but I don't see any point in doing it with solids. |
Author: | simon k [ Mon Sep 24, 2018 10:17 am ] |
Post subject: | Re: 7.5 disc brake |
sako wrote: Any recommendations??? buy the conversion kit |
Author: | drmini in aust [ Mon Sep 24, 2018 10:20 am ] |
Post subject: | Re: 7.5 disc brake |
^^^ Because the S drive flange and rotor's detail is different to 8.4s. |
Author: | hpal [ Mon Sep 24, 2018 11:28 am ] |
Post subject: | Re: 7.5 disc brake |
This kit gets you vented discs and alloy calipers http://oz.minisport.com/mslms01kit-7-9- ... ipers.html just Check if it fits under 10’s Or this http://oz.minisport.com/mslms03b-7-5-br ... ipers.html |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |