Ausmini
It is currently Fri Mar 29, 2024 10:04 am

All times are UTC + 10 hours




Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Sat Sep 29, 2018 2:56 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 349
Location: Mangilao, Guam
I have some parts laying around and I think I will really have no use for them and no one else on Guam would need these because no other Mini on Guam. I was going to throw them away. Is there anything that you see that I should keep?

Thanks

Image

Image

Image

Double leading shoe pair front hub

Image

Pair rear brake drum with built in spacer

Image

Remote box from the GT

Image

1 1/2 intake manifold

Image

3 to 1 pressed steel headers

Image

AUS 29d distributor

_________________
1973 Clubman GT
YG2S8 1637


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 3:14 pm 
Offline
1360cc
1360cc
User avatar

Joined: Mon Aug 23, 2004 10:07 pm
Posts: 10650
Location: SE Melbourne
If you dont need or want them, or anything for them, just put them on here or gumtree as a lot lot for free- they could be of use to somebody!


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 3:45 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 349
Location: Mangilao, Guam
Image

Air filter housing

Image

Elbow

Image

Head light trim

Image

No idea

Image

Filters

Image

Image

Brake booster

_________________
1973 Clubman GT
YG2S8 1637


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 3:58 pm 
Offline
1098cc
1098cc

Joined: Sat Jul 23, 2011 8:17 am
Posts: 1964
Location: san remo nsw
The 'no idea' part looks like a heater air inlet for firewall.


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 4:52 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 349
Location: Mangilao, Guam
peterb wrote:
The 'no idea' part looks like a heater air inlet for firewall.


Thanks I should throw all of these away soon unless I can give them to somebody or some are hard to find

_________________
1973 Clubman GT
YG2S8 1637


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 6:35 pm 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 349
Location: Mangilao, Guam
peterb wrote:
The 'no idea' part looks like a heater air inlet for firewall.


Thanks I should throw all of these away soon unless I can give them to somebody or some are hard to find parts

_________________
1973 Clubman GT
YG2S8 1637


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 6:41 pm 
Offline
1275cc
1275cc
User avatar

Joined: Fri May 02, 2008 3:07 pm
Posts: 5069
Location: The Internet
GuamMini wrote:
peterb wrote:
The 'no idea' part looks like a heater air inlet for firewall.


Thanks I should throw all of these away soon unless I can give them to somebody or some are hard to find parts


I can't see any hard to get items. If you were selling these as a job lot in a large Australian city then you could get a couple of hundred for the lot. The postage will be a killer from Guam. Postage within Australia is not much better.

Drum brake parts are not wanted.
Spacer drums are $27.50 new so not worth paying the postage for used ones.
The remote change would be worth a bit if in good condition but its not a high in demand item.
Standard 1 1/2 SU metal airbox is something that is not asked for very often.
Standard 1 1/2 inlet manifold are not wanted.
People would rather buy an original Lockheed booster rather than the Bosch alternative.
The 29D4 with vacuum is not very popular.
If the extractors are factory original ones then they are worth a bit in good condition. If thin and rusted or with holes they are not worth much.


Last edited by gtogreen1969 on Sun Sep 30, 2018 2:47 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 7:29 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15861
Location: Wodonga - Vic/NSW border
The only thing I think you should definitely keep is the gearbox remote - there's a possibility you'll need one in the future - slim, but possible.

I'd also keep the headlight rings, you might damage or lose one

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
PostPosted: Sat Sep 29, 2018 11:46 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sat Apr 14, 2007 8:34 pm
Posts: 3414
Location: Cowra
Keep the original pressed seam extractors

Sent from my SM-G935F using Tapatalk

_________________
Image


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 8:29 am 
Offline
848cc
848cc
User avatar

Joined: Mon Sep 26, 2016 11:27 am
Posts: 349
Location: Mangilao, Guam
Awesome responses I will keep the remote gear change and the extractors everything else will be thrown away. Thanks

_________________
1973 Clubman GT
YG2S8 1637


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 9:17 am 
Offline
1098cc
1098cc
User avatar

Joined: Wed Aug 06, 2008 10:14 am
Posts: 1364
Location: Sydney
Brake booster also used for Alfa Romeos so if anyone has an old one there, may need it or for parts...

_________________
Cooper S Mk2
Cooper S Mk1
ex Cooper S Mk2, various Morris 1100s, 1300s, 1500s, Leyland Sherpa!


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 10:29 am 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15861
Location: Wodonga - Vic/NSW border
Bubbacluby wrote:
Keep the original pressed seam extractors


oops, missed that they were pressed extractors - keep them, send them to me maybe...

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 6:03 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Aug 31, 2006 7:56 pm
Posts: 2651
Location: Muswellbrook -- NSW
Take the ball joint pins out and keep the shims .


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 6:11 pm 
Offline
Yay For Hay!
User avatar

Joined: Wed Sep 08, 2004 9:27 pm
Posts: 15861
Location: Wodonga - Vic/NSW border
goodie wrote:
Take the ball joint pins out and keep the shims .


good one!! I do that too, though there is a pair of drum brake uprights in my trailer ready to go to scrap and I forgot all about it

_________________
did I tell you that I won a trophy?


Top
 Profile  
 
PostPosted: Sun Sep 30, 2018 6:52 pm 
Offline
1275cc
1275cc
User avatar

Joined: Thu Aug 31, 2006 7:56 pm
Posts: 2651
Location: Muswellbrook -- NSW
I know what you're doing tomorrow :lol:


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 22 posts ]  Go to page 1, 2  Next

All times are UTC + 10 hours


Who is online

Users browsing this forum: Barkfast and 44 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.