Ausmini
It is currently Mon Apr 29, 2024 2:53 am

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
Firefirey
 Post subject: 29D Distributor Cap
PostPosted: Thu Dec 20, 2018 3:48 am 
Offline
848cc
848cc

Joined: Fri Mar 13, 2009 7:41 pm
Posts: 459
Location: New Zealand
Did Lucas Australia make the distributor cap for the MK 2 Cooper S?
I understand the original colour of the cap should be black.
What would be the part number inside the cap.
Any info would be great thanks
Top
 Profile  
 
drmini in aust
 Post subject: Re: 29D Distributor Cap
PostPosted: Thu Dec 20, 2018 1:57 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
Yes I believe Lucas Australia did. They were used on other makes here also.

Bosch equivalent is a GL278.
Intermotor 46920.
Lucas 62410373, according to eBay seller in UK. This may also be the Oz number, I am not sure.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
winabbey
 Post subject: Re: 29D Distributor Cap
PostPosted: Thu Dec 20, 2018 7:02 pm 
Offline
1360cc
1360cc
User avatar

Joined: Wed Oct 03, 2007 9:04 pm
Posts: 6654
Location: Melbourne, VIC
The 29D4 distributor came with a black Lucas Australia cap with the part number 62410456 embossed inside under the coil lead connector.

The only caps readily available now are the Bosch brown ones.

Attachment:
29D4 Cap c.jpg


Attachment:
29D4 Cap b.jpg


Attachment:
29D4 Cap a.jpg


You do not have the required permissions to view the files attached to this post.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43
Top
 Profile  
 
Firefirey
 Post subject: Re: 29D Distributor Cap
PostPosted: Fri Dec 21, 2018 11:42 am 
Offline
848cc
848cc

Joined: Fri Mar 13, 2009 7:41 pm
Posts: 459
Location: New Zealand
Thanks drmini in aust.

Have now seen a photo so know what to look for.

Cheers
Top
 Profile  
 
9YaTaH
 Post subject: Re: 29D Distributor Cap
PostPosted: Fri Dec 21, 2018 12:58 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
Weren't side-entry caps factory fitted at some stage :?: :|

_________________
"Show me the Mini!"
Top
 Profile  
 
drmini in aust
 Post subject: Re: 29D Distributor Cap
PostPosted: Fri Dec 21, 2018 1:10 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39643
Location: near Baulkham Hills, NSW
9YaTaH wrote:
Weren't side-entry caps factory fitted at some stage :?: :|

Mk1 S had a 23D4 dizzy with side entry cap. Most? Mk2 S were 29D with top entry.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
9YaTaH
 Post subject: Re: 29D Distributor Cap
PostPosted: Fri Dec 21, 2018 4:38 pm 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
drmini in aust wrote:
9YaTaH wrote:
Weren't side-entry caps factory fitted at some stage :?: :|

Mk1 S had a 23D4 dizzy with side entry cap. Most? Mk2 S were 29D with top entry.


Thanks Doc...side entry were better for water protection with a boot...wonder what drove the change? (probably the parts bin overflowing with top entry...)

_________________
"Show me the Mini!"
Top
 Profile  
 
Scoop
 Post subject: Re: 29D Distributor Cap
PostPosted: Fri Dec 21, 2018 9:58 pm 
Offline
998cc
998cc

Joined: Mon Mar 10, 2014 11:38 am
Posts: 1139
Location: Tassie
9YaTaH wrote:
drmini in aust wrote:
9YaTaH wrote:
Weren't side-entry caps factory fitted at some stage :?: :|

Mk1 S had a 23D4 dizzy with side entry cap. Most? Mk2 S were 29D with top entry.


Thanks Doc...side entry were better for water protection with a boot...wonder what drove the change? (probably the parts bin overflowing with top entry...)

My guess was cost! 23d4 from england as opposed to locally built 29d. They did that with most stuff didn't they? 2 screw tail lights example, interiors, rocker and timing covers. What ever could be made here and not shipped over could be a saving.

_________________
1963 Morris 850 Smoke Grey
1963 Morris 850 Shadow Blue
1965 Morris Mini Smooth Van
1966 Morris Mini Van
1969 Morris Mini Deluxe Resto
5/72 Clubman Gt
Top
 Profile  
 
9YaTaH
 Post subject: Re: 29D Distributor Cap
PostPosted: Sat Dec 22, 2018 5:49 am 
Offline
1360cc
1360cc
User avatar

Joined: Sun Apr 11, 2004 11:32 am
Posts: 12390
Location: Sthrn HiLoLands, NSW, Australia
true...local content was mandated by the Gummint...

_________________
"Show me the Mini!"
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 9 posts ] 

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 97 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.