I currently have my clutch system apart and want to replace the clevis pins ect.

I want to also replace the clutch master pushrod because I’m sure the holes in the fork are worn oval.

However I can’t seem to find them as a seperate part on any of the usual Mini Suppliers?


Sent from my iPad using Tapatalk

_________________

68 Morris Cooper S Mk1 (*ex 78 1275 LS 4th last built, 70 Morris 1500 OHC & 70 MiniMatic)

Not seen them for years. Most people weld the pin holes and redrill. Even back in the 70s.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

In case it helps the BMC part number is 17H7557 and Lockheed 92021.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

A while ago I rang up AP Racing Australia as a Australian division of AP, they said they can still get a lot of the Lockheed brake stuff for minis.

It might be worth a look?
https://www.apracing.com/

_________________
---
Roads need more corners
A Deluxe(CG13DE), 2 Clubbies(998 and 1275) and 2 Morris 1100Ss

Hi Phillb
I have both types of clevis that have been welded. 1 for the tin can and for the plastic reservoir types. so if you get stuck let me know and you can have one.
Rob D