ausmini https://www.ausmini.com/forums/ |
|
valve spring tester https://www.ausmini.com/forums/viewtopic.php?f=2&t=98227 |
Page 1 of 1 |
Author: | kiwiinwgtn [ Fri Feb 01, 2019 7:54 pm ] |
Post subject: | valve spring tester |
hi i have been lucky enough to purchase a warren and brown valve spring tester. has anyone had any experience in maintaining one. it appears to work off hydraulic pressure. is this correct. can i change the oil in it. thanks Kiwiinwgtn Sent from my SM-J530Y using Tapatalk |
Author: | kiwiinwgtn [ Fri Feb 01, 2019 7:56 pm ] |
Post subject: | Re: valve spring tester |
kiwiinwgtn wrote: hi i have been lucky enough to purchase a warren and brown valve spring tester. has anyone had any experience in maintaining one. it appears to work off hydraulic pressure. is this correct. can i change the oil in it. thanks Kiwiinwgtn Sent from my SM-J530Y using Tapatalk photos added Sent from my SM-J530Y using Tapatalk |
Author: | cooperess [ Fri Feb 01, 2019 7:59 pm ] |
Post subject: | Re: valve spring tester |
Nice. |
Author: | 9YaTaH [ Sat Feb 02, 2019 7:03 am ] |
Post subject: | Re: valve spring tester |
kiwiinwgtn wrote: hi i have been lucky enough to purchase a warren and brown valve spring tester. has anyone had any experience in maintaining one. it appears to work off hydraulic pressure. is this correct. can i change the oil in it. thanks Kiwiinwgtn Sent from my SM-J530Y using Tapatalk W&B have moved from Foot-us-scray...but why not ask them the question https://www.warrenandbrown.com.au/ |
Author: | kiwiinwgtn [ Sat Feb 02, 2019 7:15 am ] |
Post subject: | Re: valve spring tester |
9YaTaH wrote: kiwiinwgtn wrote: hi i have been lucky enough to purchase a warren and brown valve spring tester. has anyone had any experience in maintaining one. it appears to work off hydraulic pressure. is this correct. can i change the oil in it. thanks Kiwiinwgtn Sent from my SM-J530Y using Tapatalk W&B have moved from Foot-us-scray...but why not ask them the question https://www.warrenandbrown.com.au/ Sent from my SM-J530Y using Tapatalk |
Author: | 9YaTaH [ Sat Feb 02, 2019 7:42 am ] |
Post subject: | Re: valve spring tester |
kiwiinwgtn wrote: thanks thought they where long gone. will get in in contact Sent from my SM-J530Y using Tapatalk Can't see why you couldn't replace the oil, the gauge does the indication, just ask if Tellus (for example) would be OK [should be an oil to use sticker etc on the unit itself] |
Author: | winabbey [ Sat Feb 02, 2019 9:18 am ] |
Post subject: | Re: valve spring tester |
Do a Google search on warren and brown valve spring tester. There's a few hits and some might be helpful. In this one the owner says he replaced the seal and added oil to get his working. https://www.speedtalk.com/forum/viewtopic.php?t=52326 |
Author: | sitnlo62 [ Wed Feb 06, 2019 8:16 pm ] |
Post subject: | Re: valve spring tester |
You will need to buy a Calibration spring to test its calibration at known heights and pressures. https://www.powerhouseproducts.com/cali ... pring.html |
Author: | kiwiinwgtn [ Wed Feb 06, 2019 8:28 pm ] |
Post subject: | Re: valve spring tester |
sitnlo62 wrote: You will need to buy a Calibration spring to test its calibration at known heights and pressures. yes good point. will get one to test the machine. thanks for the link https://www.powerhouseproducts.com/cali ... pring.html Sent from my SM-J530Y using Tapatalk |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |