ausmini
https://www.ausmini.com/forums/

Hydroblasting in Port Stephens Area
https://www.ausmini.com/forums/viewtopic.php?f=2&t=98429
Page 1 of 1

Author:  cooperess [ Fri Apr 05, 2019 7:53 am ]
Post subject:  Hydroblasting in Port Stephens Area

I've seen a lot of talk about hydro-blasting parts but Google is of no help.

Can any one point me to a hydro-blaster in my area?

Author:  p7676 [ Fri Apr 05, 2019 8:24 am ]
Post subject:  Re: Hydroblasting in Port Stephens Area

use grit blasting

Author:  winabbey [ Fri Apr 05, 2019 8:29 am ]
Post subject:  Re: Hydroblasting in Port Stephens Area

p7676 wrote:
use grit blasting

For delicate parts like the carbies and brake components hydroblasting has the advantage that it doesn't remove or damage any of the base material. The result is basically the part as it was originally cast or forged. The results posted in this thread speak for themselves as far as I'm concerned, but each to their own preferred method. ;)

Author:  Ian_B [ Tue Apr 09, 2019 6:07 pm ]
Post subject:  Re: Hydroblasting in Port Stephens Area

Guy in Newcastle does it from home Not cheap but does a top job Did a pair of DCOE webers for me and a wok

Author:  Ian_B [ Mon Apr 15, 2019 9:36 pm ]
Post subject:  Re: Hydroblasting in Port Stephens Area

https://www.newcastlevapourblasting.com ... gIWyPD_BwE
Does top work

Author:  cooperess [ Mon Apr 15, 2019 10:10 pm ]
Post subject:  Re: Hydroblasting in Port Stephens Area

Ian_B wrote:
https://www.newcastlevapourblasting.com/?gclid=EAIaIQobChMI8ePcxoDS4QIVyxErCh097A89EAAYASAAEgIWyPD_BwE
Does top work

Just what I.m looking for, many thanks.

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/