ausmini https://www.ausmini.com/forums/ |
|
Hydroblasting in Port Stephens Area https://www.ausmini.com/forums/viewtopic.php?f=2&t=98429 |
Page 1 of 1 |
Author: | cooperess [ Fri Apr 05, 2019 7:53 am ] |
Post subject: | Hydroblasting in Port Stephens Area |
I've seen a lot of talk about hydro-blasting parts but Google is of no help. Can any one point me to a hydro-blaster in my area? |
Author: | p7676 [ Fri Apr 05, 2019 8:24 am ] |
Post subject: | Re: Hydroblasting in Port Stephens Area |
use grit blasting |
Author: | winabbey [ Fri Apr 05, 2019 8:29 am ] |
Post subject: | Re: Hydroblasting in Port Stephens Area |
p7676 wrote: use grit blasting For delicate parts like the carbies and brake components hydroblasting has the advantage that it doesn't remove or damage any of the base material. The result is basically the part as it was originally cast or forged. The results posted in this thread speak for themselves as far as I'm concerned, but each to their own preferred method. |
Author: | Ian_B [ Tue Apr 09, 2019 6:07 pm ] |
Post subject: | Re: Hydroblasting in Port Stephens Area |
Guy in Newcastle does it from home Not cheap but does a top job Did a pair of DCOE webers for me and a wok |
Author: | Ian_B [ Mon Apr 15, 2019 9:36 pm ] |
Post subject: | Re: Hydroblasting in Port Stephens Area |
https://www.newcastlevapourblasting.com ... gIWyPD_BwE Does top work |
Author: | cooperess [ Mon Apr 15, 2019 10:10 pm ] |
Post subject: | Re: Hydroblasting in Port Stephens Area |
Ian_B wrote: https://www.newcastlevapourblasting.com/?gclid=EAIaIQobChMI8ePcxoDS4QIVyxErCh097A89EAAYASAAEgIWyPD_BwE Does top work Just what I.m looking for, many thanks. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |