ausmini • View topic - Diagonal Tie Rod Washer position

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Diagonal Tie Rod Washer position

Moderators: winabbey, simon k, poeee, Mick

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

GuamMini

Post subject: Diagonal Tie Rod Washer position

Posted: Thu Jun 06, 2019 8:39 am

848cc

Joined: Mon Sep 26, 2016 11:27 am
Posts: 356
Location: Mangilao, Guam

I am replacing my Diagonal Tie Rod bushings and would like to know how does the washer on the side where the nut goes is facing? it is not a flat washer but a washer the is curved or like a bowl shape. Which side is facing the bushing the closed or open side of the washer. Sorry this is the best I could explain it.

I hope some of this picture helps.

This looks like there are two washers a flat one and a curved one?

_________________
1973 Clubman GT - YG2S8 1637

Top

cgo

Post subject: Re: Diagonal Tie Rod Washer position

Posted: Thu Jun 06, 2019 11:40 am

848cc

Joined: Thu Sep 17, 2015 9:25 pm
Posts: 181
Location: Brisbane

20 is cup washer, concave face to bush
21 is flat washer
Diagram only shows one bush of the two per side

You do not have the required permissions to view the files attached to this post.

_________________
Clive G
1969 Mk II Cooper S
1970 MK II Cooper S
1963 Triumph Spitfire
1982 RX-7 Series 2

Top

GuamMini

Post subject: Re: Diagonal Tie Rod Washer position

Posted: Thu Jun 06, 2019 11:54 am

848cc

Joined: Mon Sep 26, 2016 11:27 am
Posts: 356
Location: Mangilao, Guam

cgo wrote:

20 is cup washer, concave face to bush
21 is flat washer
Diagram only shows one bush of the two per side

Thank you no wonder they also sell the flat one, thanks

_________________
1973 Clubman GT - YG2S8 1637

Top

1071 S

Post subject: Re: Diagonal Tie Rod Washer position

Posted: Thu Jun 06, 2019 6:50 pm

998cc

Joined: Fri Apr 01, 2011 8:33 pm
Posts: 1147

Looks like you have the "correct" pairing of one poly bush with one rubber version. Don't forget to put the poly item at the front....

Cheers, Ian

Top

Page 1 of 1

[ 4 posts ]

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours

Who is online

Users browsing this forum: No registered users and 91 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: