ausmini https://www.ausmini.com/forums/ |
|
Master cylinders https://www.ausmini.com/forums/viewtopic.php?f=2&t=98493 |
Page 2 of 2 |
Author: | crisonic [ Mon Apr 29, 2019 5:02 pm ] |
Post subject: | Re: Master cylinders |
Clive, Many thanks . I have 5 of these spacers in my spares bin and had no idea until now I know what they were for |
Author: | gtogreen1969 [ Wed May 08, 2019 7:00 pm ] |
Post subject: | Re: Master cylinders |
Just to add to this thread - These are the change over points for a few other minis and mokes. Attachment: SLS 177 Aug 1969 brake mc spacer, YG2S1 3290.jpg
|
Author: | AEG163job [ Thu May 09, 2019 10:43 am ] |
Post subject: | Re: Master cylinders |
gtogreen1969 wrote: glenndunn wrote: Mine is 3688 I have never seen the plastic extensions befiore, never seen them is any of the mini sellers catalogues. Here is one example https://minikingdomonline.com.au/produc ... with-seal/Where would I be able to get them Just be careful when you screw the extensions onto the tin tanks. Too much force may break off the threaded section which is only soldered on. Which is what I did (ham fisted). So next time I used a smear of RTV on the rubber seal to prevent any brake fluid leakage. As you know, conventional brake fluid will leak out anywhere it can find a spot, then destroy everything in it's path |
Page 2 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |