ausmini
https://www.ausmini.com/forums/

Master cylinders
https://www.ausmini.com/forums/viewtopic.php?f=2&t=98493		 Page 2 of 2
Author:  crisonic [ Mon Apr 29, 2019 5:02 pm ]
Post subject:  Re: Master cylinders
Clive, Many thanks . I have 5 of these spacers in my spares bin and had no idea until now I know what they were for
Author:  gtogreen1969 [ Wed May 08, 2019 7:00 pm ]
Post subject:  Re: Master cylinders
Just to add to this thread - These are the change over points for a few other minis and mokes.

Attachment:
SLS 177 Aug 1969 brake mc spacer, YG2S1 3290.jpg
Author:  AEG163job [ Thu May 09, 2019 10:43 am ]
Post subject:  Re: Master cylinders
gtogreen1969 wrote:
glenndunn wrote:
Mine is 3688 I have never seen the plastic extensions befiore, never seen them is any of the mini sellers catalogues.
Where would I be able to get them
Here is one example https://minikingdomonline.com.au/produc ... with-seal/


Just be careful when you screw the extensions onto the tin tanks. Too much force may break off the threaded section which is only soldered on.
Which is what I did (ham fisted). So next time I used a smear of RTV on the rubber seal to prevent any brake fluid leakage. As you know, conventional brake fluid will leak out anywhere it can find a spot, then destroy everything in it's path :evil:
Page 2 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/