ausmini https://www.ausmini.com/forums/ |
|
Primary Gear. https://www.ausmini.com/forums/viewtopic.php?f=2&t=98612 |
Page 1 of 1 |
Author: | stewartrjh [ Sat May 25, 2019 10:17 pm ] |
Post subject: | Primary Gear. |
Can anyone tell me what a 22A 79 Primary gear fits ? Interested in it fitting an 1100 engine, from what I see it should be a 22A1493 which should fit 850, 998 and 1098cc. Thanks Stewart. |
Author: | TOZOOM [ Sun May 26, 2019 7:51 am ] |
Post subject: | Re: Primary Gear. |
Hi the gear that you have mentioned is not for a small bore eng. unsure what that gear fits as its not a manual type or a auto type. |
Author: | Bill B [ Sun May 26, 2019 10:56 am ] |
Post subject: | Re: Primary Gear. |
According to ebay, 22A79 is the primary gear for early 850 with oil feed to bushes. I don't know if it can be run dry like the later primary gears. |
Author: | drmini in aust [ Sun May 26, 2019 7:31 pm ] |
Post subject: | Re: Primary Gear. |
Bill B wrote: According to ebay, 22A79 is the primary gear for early 850 with oil feed to bushes. I don't know if it can be run dry like the later primary gears. If so it won't fit your crank, the oil fed 850 crank nose is 1-3/8" not 1-1/2" like all 998 and 1098. If run dry it would seize, its bushes need oil. |
Author: | stewartrjh [ Mon May 27, 2019 8:11 pm ] |
Post subject: | Re: Primary Gear. |
Ah so very early 850 then. Thanks for the info, not what I could use then. Stewart. |
Author: | drmini in aust [ Mon May 27, 2019 10:23 pm ] |
Post subject: | Re: Primary Gear. |
stewartrjh wrote: Ah so very early 850 then. Thanks for the info, not what I could use then. Stewart. Plenty of good S/H 998/1098 A series primary gears about. Common as. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |