| ausmini https://www.ausmini.com/forums/ |
|
| Ignition Coil 1973 Clubman GT https://www.ausmini.com/forums/viewtopic.php?f=2&t=99232 |
Page 1 of 1 |
| Author: | GuamMini [ Mon Sep 09, 2019 2:08 pm ] |
| Post subject: | Ignition Coil 1973 Clubman GT |
Finally decided to move the ignition coil where it belongs. However if I mount it where it should be the bottom is touching the connections and cover of the alternator unless I mount it way up high where the bracket for it is at the very bottom of the coil itself. There must be something odd the way it mounts with my coil and bracket. Can anyone see what is wrong?    
|
|
| Author: | sitnlo62 [ Mon Sep 09, 2019 7:55 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
Can you post some clearer photos Mate. It is very hard ts see what is going on there with those photos. However the coil does have to sit high enough to just clear the alternator. It is all a pretty tight fit Show us some clear photos of your brackets and as much detail as you can. |
|
| Author: | GuamMini [ Tue Sep 10, 2019 6:49 am ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
Thank you but where is a good place to host the pictures? |
|
| Author: | 9YaTaH [ Tue Sep 10, 2019 8:49 am ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
GuamMini wrote: Thank you but where is a good place to host the pictures? Upload direct from your computer 
|
|
| Author: | sitnlo62 [ Tue Sep 10, 2019 9:45 am ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
viewtopic.php?f=25&t=10405 |
|
| Author: | winabbey [ Tue Sep 10, 2019 10:56 am ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
This is a later set of instructions that I think are a bit easier to follow. viewtopic.php?f=25&t=96873 |
|
| Author: | GuamMini [ Tue Sep 10, 2019 1:46 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
please see attached pictures |
|
| Author: | gtogreen1969 [ Tue Sep 10, 2019 1:48 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
I think you have the wrong coil bracket. It needs to be a single bolt hole / offset bracket style. Attachment: Coil Bracket 2.jpg Attachment: Coil Bracket 1.jpg Attachment: Coil Bracket.jpg Attachment: 1971 alternator.jpg
|
|
| Author: | GuamMini [ Tue Sep 10, 2019 4:13 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
Thank you gtogreen1969, would you know where I could buy that bracket? |
|
| Author: | gtogreen1969 [ Tue Sep 10, 2019 4:16 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
GuamMini wrote: Thank you gtogreen1969, would you know where I could buy that bracket? I just googled images of coil brackets and there are quite a few. Try Mustang coil bracket. Are there any speed shops in Guam?
|
|
| Author: | GuamMini [ Tue Sep 10, 2019 4:34 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
gtogreen1969 wrote: GuamMini wrote: Thank you gtogreen1969, would you know where I could buy that bracket? I just googled images of coil brackets and there are quite a few. Try Mustang coil bracket. Are there any speed shops in Guam?Sadly none, I would need to find one even a used one would be fine  anybody have one lying around????
|
|
| Author: | timmy201 [ Tue Sep 10, 2019 5:11 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
You can also just bend the one you have and just use the single bolt hole. |
|
| Author: | Morris 1100 [ Tue Sep 10, 2019 5:24 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
Ford Econoline, Ford F150, etc. |
|
| Author: | sitnlo62 [ Tue Sep 10, 2019 5:41 pm ] |
| Post subject: | Re: Ignition Coil 1973 Clubman GT |
timmy201 wrote: You can also just bend the one you have and just use the single bolt hole. No you can't, it won't provide the required offset. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|