ausmini https://www.ausmini.com/forums/ |
|
High zinc oil https://www.ausmini.com/forums/viewtopic.php?f=2&t=99621 |
Page 2 of 2 |
Author: | FNQ [ Tue Jan 28, 2020 8:08 am ] |
Post subject: | Re: High zinc oil |
Good info - thanks for sharing clownman and clip |
Author: | clip [ Tue Jan 28, 2020 6:00 pm ] |
Post subject: | Re: High zinc oil |
Just out of interest, found the current specifications for maximum amounts of additives to achieve API ratings. P is phosphorus, Zn is zinc, and B is boron. Each figure is total parts per million of additives. These can also be roughly expressed in percentages by multiplying by .0001 (1301 PPM = .13 percent, 994 PPM = .099 percent) API P Zn B SJ 1301 1280 151 CI-4 1150 1374 83 SL 994 1182 133 CJ-4 819 1014 26 SM 770 939 127 The following is comparison with Penrite HPR 30 and their Classic Attachment: Capture.JPG So the Classic is sitting at 1670ppm which is getting up there, but safely under the 2000. not a lot over the HPR30 though. Haven't compared prices. I'm meeting with an old mate that is in the automotive oil business tomorrow, be interesting to see what he thinks - and what he sells. |
Page 2 of 2 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |