| ausmini https://www.ausmini.com/forums/ |
|
| 25D electronic ignition https://www.ausmini.com/forums/viewtopic.php?f=2&t=99640 |
Page 1 of 1 |
| Author: | Stibbsy [ Thu Jan 30, 2020 1:30 pm ] |
| Post subject: | 25D electronic ignition |
https://minisport.com.au/mini-moke-25d- ... ersion-kit What opinions does anybody have on this product. Thanks in advance. |
|
| Author: | DavidE [ Thu Jan 30, 2020 1:44 pm ] |
| Post subject: | Re: 25D electronic ignition |
Stibbsy wrote: https://minisport.com.au/mini-moke-25d-electronic-ignition-conversion-kit What opinions does anybody have on this product. Thanks in advance. Can't say anything on this particular unit, but have two cars with Pertronix Ignitors, and another with a unit bought from a classic British spare parts place in Beerwah. Not an ounce of trouble since installing them. |
|
| Author: | drmini in aust [ Fri Jan 31, 2020 3:37 am ] |
| Post subject: | Re: 25D electronic ignition |
I have used 2 of these, they work well. Easy to install. |
|
| Author: | Stibbsy [ Fri Jan 31, 2020 9:18 am ] |
| Post subject: | Re: 25D electronic ignition |
drmini in aust wrote: I have used 2 of these, they work well. Easy to install. Is there a gap setting between reluctor module and centre trigger, or is it all preset. |
|
| Author: | drmini in aust [ Fri Jan 31, 2020 10:18 am ] |
| Post subject: | Re: 25D electronic ignition |
It's preset by the bracket. I think about .030" gap. |
|
| Author: | Mick [ Fri Jan 31, 2020 7:41 pm ] |
| Post subject: | Re: 25D electronic ignition |
The units are not sensitive to gap when installed as usual. Just put them in and enjoy the difference. |
|
| Author: | 9YaTaH [ Sat Feb 01, 2020 7:15 am ] |
| Post subject: | Re: 25D electronic ignition |
Stibbsy wrote: drmini in aust wrote: I have used 2 of these, they work well. Easy to install. Is there a gap setting between reluctor module and centre trigger, or is it all preset. Some people have had a problem with rotor buttons/dissy caps being a different size and even fouling the dissy gubbins… |
|
| Author: | AJ [ Sun Feb 02, 2020 11:39 am ] |
| Post subject: | Re: 25D electronic ignition |
These are very good , I have 3 of them and a complete new distributor , they work very well , the seller below is great to deal with , good advice for setup and ongoing help if needed , they can recurve the new distributors also https://www.ebay.com.au/itm/Mini-850-99 ... SwHnFVyZIo https://www.ebay.com.au/itm/AccuSpark-2 ... SwrLxaiVrB Edit : They also have Positive Earth kits and complete Positive earth distributors |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|