| ausmini https://www.ausmini.com/forums/ |
|
| Rear brake wheel cylinder cups https://www.ausmini.com/forums/viewtopic.php?f=2&t=99686 |
Page 1 of 1 |
| Author: | Bill B [ Sat Feb 15, 2020 11:26 am ] |
| Post subject: | Rear brake wheel cylinder cups |
A while ago, I bought 8 rubber cups for the rear wheel cylinders on the "S" - 5/8inch bore. Recently went to fit them but the new cups were a different PBR part number than the old ones that came out. The new ones have a chamfer around the main sealing lip while the old ones have a sharp edge. Old cup is P5057 (lower one). Attachment: Cups rear wheel cylinder S.jpg Have tried to find a PBR applications catalogue on the net to see what I should have or what the new ones are intended for; but no luck. Does anyone know what PBR part number/s suit "S"? |
|
| Author: | 9YaTaH [ Sun Feb 16, 2020 12:07 pm ] |
| Post subject: | Re: Rear brake wheel cylinder cups |
https://abouttimespares.com.au/TimeSpar ... 092/Brakes https://www.autobarn.com.au/wheel-cylin ... l-protex-3 https://www.agskartparts.com.au/product ... NDER-SEALS etc |
|
| Author: | Bill B [ Sun Feb 16, 2020 3:29 pm ] |
| Post subject: | Re: Rear brake wheel cylinder cups |
Thanks 9TaTaH for the links. Wasn't sure how to use the kart parts site but the abouttimespares was a good site I've never seen before with some useful items I will need. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|