Do any Mini Wiper arms fit the above wheel boxes?

I ask this question because of the difference in the wheel box teeth.

Correct me if I am wrong.

37H6100 has 32 teeth
37H7200 has 22 teeth

Thanks for the pic of a dipped scuttle. Ive been looking for a clear pic of that for ages!!!!


Sent from my iPhone using Tapatalk

_________________
Australian 69 DeLuxe w/ hydro suspension. Single HS4 (twin HS2 being assembled). 1275 1100s engine (998 due for rebuild) . Clubman remote gear change. Automatic front subframe.

The later OZ built cars from around 1968 onwards have Lucas Australia wiper components and they are not interchangeable with the earlier Lucas UK wiper components.
The motors are different, the drive cable assemblies are different, the wheel boxes have a different number of teeth and the wheel box mounting hardware is also different.
The later wiper blade arms are longer as well. IIRC - 11" instead of 10".
The wiring is different as the Lucas Australia motors are permanent magnet motors and use "Regenerative Braking" to park the wiper arms in the correct position.
There are +ve and -ve earth versions of the motors. +ve earth versions have a silver cover over the cable drive mechanism and -ve earth versions have a gold cover. The -ve earth motors come in single and 2 speed versions.
Not sure if the +ve earth motors come in single or 2 speed versions.
Minis didn't have 2 speed wipers until the ADRs required them from around 1971?

RonR

_________________
68 build Mk1 Cooper S
72 Clubman GT project. Total restoration required

Correct me if I am wrong or let me know if I'm right.

37H6100 has 32 teeth
37H7200 has 22 teeth

Looked at my wheel box today. The part number is completely different?

That’s the Lucas part number, not the BMC

_________________

As confirmed by the parts list.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

Wish I could get a copy of PUB1012.

Took me a long time to find a good hardcopy. Eventually had to combine several that had pages missing or not updated to make one good version.

For a complete round-nose Mini parts catalogue with all the latest updates you will also need PUB1011 Vol 1, which covers section A - engine, plus Vol 2 which covers B - Ignition, E - Clutch and F - gearbox. PUB1012 covers all the rest.

Would you be interested in a high resolution scanned copy on memory stick of PUB1011 and 1012 for a nominal price (i.e to help cover some of my costs in acquiring these rare publications and for postage)?

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

I think you’d get a few people taking you up on that offer, me included!

_________________

I would be interested in a copy too please Doug if you decide to go ahead with this.
Thank you
Neil

Yep me too, happy to pay for cost of USB, postage plus a bit of beer money on too as thanks.

Sent from my Pixel 3 XL using Tapatalk

_________________
Build thread for Supercharged 1275 1967 Deluxe Resto
Build thread for Mini ute conversion 998cc Turbo

I didn't plan on doing this when I started collecting BMC and Leyland publications. They were just for my use and for posting the occasional pages on here, and elsewhere as a help to the Oz Mini enthusiast community.

I need to check memory stick and mailing costs. The files are quite big so not emailable. Will respond in a few days.

_________________
ex-NSW Police 1970 MK II Cooper S
VMCI #43

Are these the correct wiper blade arms for my 1969 Mk2?

You could consider a shared Dropbox folder. Free Dropbox account should allow others to download it from there.

Sent from my Pixel 3 XL using Tapatalk

_________________
Build thread for Supercharged 1275 1967 Deluxe Resto
Build thread for Mini ute conversion 998cc Turbo