Still available? Quite pricey + shipping!
| ausmini https://www.ausmini.com/forums/ |
|
| UK Heritage Roundnose Shells https://www.ausmini.com/forums/viewtopic.php?f=21&t=99301 |
Page 1 of 1 |
| Author: | 9YaTaH [ Sat Sep 14, 2019 11:20 am ] |
| Post subject: | UK Heritage Roundnose Shells |
Still available? Quite pricey + shipping!
|
|
| Author: | Matt I [ Sat Sep 14, 2019 12:16 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
No legal way to use one on the road here anyway unless it's considered like a brand new car... |
|
| Author: | 9YaTaH [ Sun Sep 15, 2019 8:17 am ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
Matt I wrote: No legal way to use one on the road here anyway unless it's considered like a brand new car... or if it went through post 89 ADR compliance etc after pre-approval from authorities...people are building cars out of nothing every day of the week 
|
|
| Author: | miniandmokeworld [ Mon Mar 23, 2020 4:01 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
We have three customers who have purchased these shells, and have them on the road & they have gone through all the paperwork etc via Canberra too. |
|
| Author: | winabbey [ Mon Mar 23, 2020 4:07 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
miniandmokeworld wrote: We have three customers who have purchased these shells, and have them on the road & they have gone through all the paperwork etc via Canberra too. That's really interesting news, and good for those wanting to take the path of a brand new shell. Can you give a summary of the steps involved to make them road registerable so others can make an informed decision? A ballpark figure of costs and timing would also be of great benefit. |
|
| Author: | miniandmokeworld [ Mon Mar 23, 2020 4:56 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
We have helped these customers with engine builds & general parts BUT not been involved in walking the cars through the process of registration , each state of course having their own rule book as they do. |
|
| Author: | 9YaTaH [ Fri Mar 27, 2020 8:27 am ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
miniandmokeworld wrote: We have helped these customers with engine builds & general parts BUT not been involved in walking the cars through the process of registration , each state of course having their own rule book as they do. and the "Rule Book" (of course) is completely open to interpretation by local wallers who may not know excreta from clay 
|
|
| Author: | TK [ Sat Mar 28, 2020 1:27 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
I wonder if they use an old ID plate on these new shells? M&MWorld are you aware if this happened? |
|
| Author: | 9YaTaH [ Sat Mar 28, 2020 2:47 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
TK wrote: I wonder if they use an old ID plate on these new shells? M&MWorld are you aware if this happened? I doubt it...but email away info@bmh-ltd.com http://www.bmh-ltd.com/bodyshells2.htm |
|
| Author: | miniandmokeworld [ Sat Mar 28, 2020 9:01 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
TK....Not sure about the W.A client. The NSW one yes they have gone through the process in Canberra so I've been told & he tells me its been done properly. 9YTAH....despite your pre conceived idea's on many topics not all people are as low as you seem to think. AB |
|
| Author: | 9YaTaH [ Sun Mar 29, 2020 7:53 am ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
miniandmokeworld wrote: 9YTAH....despite your pre conceived idea's on many topics not all people are as low as you seem to think. AB Hah! Personal Attack Warning!! (the oldest trick in the books....) Never, ever assume AB, you have no eye deer whether I have preconceived ideas or do you know how many times me and friends have been burned by shonks...However, I well and truly DO NOT believe that all are as low as you think I do!! Unfortunately, a small cadre of individuals, businesses, government authorities etc give the vast majority of the other honest, well intentioned people a bad name...and as AUSMINI is a collective forum of enthusiasts and others seeking information...I have no problem telling it like it really is  
|
|
| Author: | miniandmokeworld [ Sun Mar 29, 2020 9:51 am ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
9YATAH….best you do some more homework on this topic before you again launch into another rant on people ( " local wallers " I believe you said ) that you do not know. It seems when ever I make a comment on this forum you can't help but twist/ bring out your negative attitudes ! I saw the topic & let it be known there were new shells now on our roads. One is owned by a well known engineer in the mini community & i'm sure will take your opinion on board- NOT !. You don't have to be obnoxious ALL the time . |
|
| Author: | 9YaTaH [ Sun Mar 29, 2020 12:19 pm ] |
| Post subject: | Re: UK Heritage Roundnose Shells |
AB, hope you feel a lot better after hucking up that big lump of phlegm Personal attacks aside... I'm sure all here on AUSMINI are feeling for all the Mini businesses out there...some will/maybe, some won't survive...all we can do is hope the world gets on top of this virus quick smart...Cheers, Mick |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|