And then Dan, when you have done yours, you can come and do mine...!!!
| ausmini https://www.ausmini.com/forums/ |
|
| 68 van 4efte, and a 70 roundy 4efte https://www.ausmini.com/forums/viewtopic.php?f=23&t=20746 |
Page 26 of 28 |
| Author: | Archangel007 [ Tue Aug 26, 2014 7:55 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
And then Dan, when you have done yours, you can come and do mine...!!!
|
|
| Author: | Gordo [ Thu Aug 28, 2014 6:02 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Archangel007 wrote: And then Dan, when you have done yours, you can come and do mine...!!! I wouldn't mind finishing it off some time very soon... Have you heard anything about the drive shafts? |
|
| Author: | Gordo [ Wed Sep 10, 2014 4:40 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Now I've just got to get the sticky off the bumpers, for what ever reason they had tape on them and most of the sticky stayed on 
|
|
| Author: | Archangel007 [ Thu Sep 11, 2014 7:48 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Looking ominous Dan....!! |
|
| Author: | Gordo [ Thu Sep 11, 2014 8:18 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Just to show the difference 
|
|
| Author: | Gordo [ Thu Sep 11, 2014 8:21 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
No idea why it's black but that's what I have so that's what I'm using. Took about half hour to get all the sticky off the front bumper, still have the rear too go |
|
| Author: | goodie [ Fri Sep 12, 2014 4:56 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Gordo wrote: Hydration Vessel not far away , good to see   .
|
|
| Author: | MiniMan_Alis [ Fri Sep 12, 2014 9:08 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
I like that black bumper! Coming along well man. |
|
| Author: | Archangel007 [ Sun Sep 14, 2014 7:26 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Dan, Did you get your EM and dump coated - it looks great! Cheers, Tricky |
|
| Author: | Gordo [ Sun Sep 14, 2014 7:57 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Tricky, I didn't personally but yes they are coated. The previous owner had them done. I need to get the dump done again as I had to put the oxygen sensor in. But am not going through that unless I'm gettin other stuff done or will do them with some one else's stuff. And Tricky have you heard anything about the drive shafts? I have a guy on the coast that can do some for me but I'll obviously need the bits back... |
|
| Author: | Archangel007 [ Sun Sep 14, 2014 9:03 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Hi Dan, I phone them every couple of weeks and get the same story - "Sorry, really busy, we will get to them soon...." I can ask them to send them back if you wish. Cheers, Tricky P.S. who did the coating on the pipework, I have to get some done on The Cat. Was going to go ceramic coating but no-one close by does it. |
|
| Author: | Gordo [ Sun Sep 14, 2014 9:07 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Archangel007 wrote: Hi Dan, I phone them every couple of weeks and get the same story - "Sorry, really busy, we will get to them soon...." I can ask them to send them back if you wish. Cheers, Tricky P.S. who did the coating on the pipework, I have to get some done on The Cat. Was going to go ceramic coating but no-one close by does it. I'm not fussed who makes the shafts, I can just see us getting this years much higher inflated pricing the long it takes. I used to get what ever exhaust shop I was using at the time to get them coated. Last lot of stuff I got done was through Mike Vine Turbos |
|
| Author: | BigDale [ Tue Sep 16, 2014 9:45 am ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Archangel007 wrote: P.S. who did the coating on the pipework, I have to get some done on The Cat. Was going to go ceramic coating but no-one close by does it. Hey Tricky, There is a guy who does ceramic coating in Brendale, he is good and also does engine balancing. http://www.hpcoatings.com.au/ "G"day, just letting everyone know that HPC High Performance Coatings is now up and running in Brendale again.We are at unit 1 number 11 Hinkler crt Brendale our phone number is 32058115.So give us a call for all your coating needs BD |
|
| Author: | Archangel007 [ Wed Sep 24, 2014 12:18 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Excellent Gordo, thanks. And he is close too - bonus!! Also, rang AGM and expressed my extreme displeasure and pissed off nature that they have not done our shafts yet - apologies flowed forth and they promised them done in the next two weeks. Can you hold on until then?? Cheers, Tricky Edit: Tried the HPC number - "Your call could not be connected" |
|
| Author: | Gordo [ Wed Sep 24, 2014 4:18 pm ] |
| Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Yeah I can wait that long. It's been since last Christmas so a little bit longer won't matter As long as they're the right lengths... And I think I'm going to have to move water lines as they're too close to the inner cvs. They actually look like they're going to foul Tricky do you have any idea what they're going to cost? |
|
| Page 26 of 28 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|