ausmini https://www.ausmini.com/forums/ |
|
68 van 4efte, and a 70 roundy 4efte https://www.ausmini.com/forums/viewtopic.php?f=23&t=20746 |
Page 28 of 28 |
Author: | LeylandMiniPhil98 [ Sun Jul 26, 2015 10:57 pm ] |
Post subject: | 68 van 4efte, and a 70 roundy 4efte |
And what hubs are those wheels on? And how wide are the new wheels going to be? I have Honda discs on the front of mine mated to mini hubs and the inch stepped drums on the rear. I am wondering if I'm going to need something that wide? Of course spacers are illegal here so I don't want to buy arches that are too wide and then not have the width to fill them... |
Author: | Jewskii [ Tue Sep 29, 2015 2:50 pm ] |
Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Still cracking on with the project? |
Author: | Gordo [ Tue Sep 29, 2015 8:47 pm ] |
Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
I've still got the van, have sold the sedan recently. Just started a new apprenticeship so funds are mega tight. Doesn't look like the van is goin to be getting anything done any time soon. Am sorta looking for a roundy sedan shell to put most of the bits into and A series power it. Just to get back into a mini again... |
Author: | Mokesta [ Tue Sep 29, 2015 9:33 pm ] |
Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
I have a mini K shell (Morris doors) with no rust sitting on the pallet racking looking for a new home. Needs paint as it started out as Camino Gold and is now a dodgy burgundy. Has doors, boot lid, fuel tank and bare sub frames. M |
Author: | miniRock [ Mon Dec 07, 2015 4:13 pm ] |
Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Just found this thread and what an absolute roller coaster of a read. The mods you had planned for the van were ambitions and would be great to see done some day. I thought I was the only one silly enough to try suicide doors on a mini. Best of luck |
Author: | Gordo [ Mon Dec 07, 2015 5:56 pm ] |
Post subject: | Re: 68 van 4efte, and a 70 roundy 4efte |
Thanks bud! The doors are done, and work well. Doesn't look like I'm going to finish it any time soon unfortunately. |
Page 28 of 28 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |