ausmini
https://www.ausmini.com/forums/

68 van 4efte, and a 70 roundy 4efte
https://www.ausmini.com/forums/viewtopic.php?f=23&t=20746
Page 28 of 28

Author:  LeylandMiniPhil98 [ Sun Jul 26, 2015 10:57 pm ]
Post subject:  68 van 4efte, and a 70 roundy 4efte

And what hubs are those wheels on? And how wide are the new wheels going to be? I have Honda discs on the front of mine mated to mini hubs and the inch stepped drums on the rear. I am wondering if I'm going to need something that wide? Of course spacers are illegal here so I don't want to buy arches that are too wide and then not have the width to fill them...

Author:  Jewskii [ Tue Sep 29, 2015 2:50 pm ]
Post subject:  Re: 68 van 4efte, and a 70 roundy 4efte

Still cracking on with the project? :)

Author:  Gordo [ Tue Sep 29, 2015 8:47 pm ]
Post subject:  Re: 68 van 4efte, and a 70 roundy 4efte

I've still got the van, have sold the sedan recently.
Just started a new apprenticeship so funds are mega tight. Doesn't look like the van is goin to be getting anything done any time soon.
Am sorta looking for a roundy sedan shell to put most of the bits into and A series power it. Just to get back into a mini again...

Author:  Mokesta [ Tue Sep 29, 2015 9:33 pm ]
Post subject:  Re: 68 van 4efte, and a 70 roundy 4efte

I have a mini K shell (Morris doors) with no rust sitting on the pallet racking looking for a new home. Needs paint as it started out as Camino Gold and is now a dodgy burgundy. Has doors, boot lid, fuel tank and bare sub frames.

M

Author:  miniRock [ Mon Dec 07, 2015 4:13 pm ]
Post subject:  Re: 68 van 4efte, and a 70 roundy 4efte

Just found this thread and what an absolute roller coaster of a read. The mods you had planned for the van were ambitions and would be great to see done some day. I thought I was the only one silly enough to try suicide doors on a mini.

Best of luck

Author:  Gordo [ Mon Dec 07, 2015 5:56 pm ]
Post subject:  Re: 68 van 4efte, and a 70 roundy 4efte

Thanks bud!
The doors are done, and work well. Doesn't look like I'm going to finish it any time soon unfortunately.

Page 28 of 28 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/