ausmini https://www.ausmini.com/forums/ |
|
14secmini, CB70 Running video pg14 https://www.ausmini.com/forums/viewtopic.php?f=23&t=31234 |
Page 2 of 19 |
Author: | Betty [ Fri May 04, 2007 12:40 am ] |
Post subject: | |
congrats mate |
Author: | 13secmini [ Sun May 06, 2007 9:06 pm ] |
Post subject: | |
I did a couple of hrs stripping the engine bay on the charade today, there are 4 engine mounts on it and they look like they will be fairly easy to incorparate into a new frame. There is about 50% of the wiring compared to the 4efte, driveshafts look pretty close to equal length to I have found a turbosmart bov, turbosmart boost controller, rx7 injectors, vl turbo fuel pump and microtech computer is a mtx8. Only mods i will do is new exhuast manifold to put turbo nice and close to the motor and down low, and maybe fit a bigger throttle body from an applause as the stock one is about 30mm haha. |
Author: | Vtec mini [ Mon May 07, 2007 8:43 am ] |
Post subject: | |
Congratulations Brad on another turbo mini, hopefully I will have my mini finished by the time you have your second one finished. Cheers Paul |
Author: | mini_matt [ Mon May 07, 2007 8:16 pm ] |
Post subject: | conversion |
change those bloody fire hose rotary injectors not that good on a normal motor |
Author: | Betty [ Fri May 18, 2007 2:51 am ] |
Post subject: | |
so brad.. it's been a while.. almost finished now ? |
Author: | simon k [ Fri May 18, 2007 9:38 am ] |
Post subject: | |
Betty wrote: so brad.. it's been a while.. almost finished now ?
he gets his mini K next weekend... so give it 2 weeks |
Author: | 13secmini [ Fri May 18, 2007 5:44 pm ] |
Post subject: | |
yep get the shell next saturday yeeha. I have pretty much got the cb70 motor out and got my mini front frame sorted with hilos, new cones and camira brakes. Bloody hell having a normal job it is hard to find time for the project but i want to have it at least together ready for dismantling and painting by xmas. |
Author: | Mini Mad [ Sun May 27, 2007 2:59 pm ] |
Post subject: | |
Brad and I went to pick up the new shell for his 14secmini project on sat from Simon (skssgn) down near the victorian border. It was a very cold morning though i was informed that it would reach 20 at some point! Fog was everywhere We encountered a slight problem with out trailer and it's wheel bearings near yass so a couple hours in we stopped in there to see if we could get some help.. One place said they couldn't help cause they would have to order the bearings in from Canberra - there was an autopro across the road Came upon this place which was happy to help: They had cool dogs Here's brad taking the hub off: They had a cool charity bash car out the front.. It was still foggy when we left Yass Then it cleared up We saw a little morrie clipping the curb.. Then came the mini We carried it onto our trailer: Simon carried the subframe: MOWOG Early trumpets that are welded 3 Men all happy. Left to Right (Simon's Dad, Brad, Simon) On the way back a volvo held us up - 90 in a 110 Brad was tired (note the laughing) I was surprised how green it was on the way down We made it home and in one piece after leaving a 5am - a wheel bearing change and back by 7pm Unloaded everything: A quick check to see if it will fit. all looks ok. Brad will have it running next week Can't wait to see this thing done |
Author: | Archangel007 [ Sun May 27, 2007 5:12 pm ] |
Post subject: | |
That looks like a nice shell Brad. Good work to you guys (and you too Simon!). Look forward to having it all in and running next week. Cheers, Tricky |
Author: | minimetoy [ Sun May 27, 2007 5:31 pm ] |
Post subject: | |
And so it begins!! Looks good Brad, have you thought of a colour yet?? |
Author: | Monster Mini [ Sun May 27, 2007 6:17 pm ] |
Post subject: | |
I bet Brad will have it on the road before your josh ...nice pics anway Nice score Brad... |
Author: | 13secmini [ Sun May 27, 2007 6:23 pm ] |
Post subject: | |
A BIG thanks to Simon and his old man for the shell. Also a big thanks to josh for coming down with me and helping out. Shell looks pretty good, couple of little holes in the floor i will fix up but looks like a good base to start with. Should have the motor in the bay next week and start making up a frame, hoping to have it rolling ready for paint end of this year, but funds and time will be the major hold up now. Dan not to sure on colour yet, anyone got some suggestions? |
Author: | NDMOON [ Sun May 27, 2007 7:12 pm ] |
Post subject: | |
Monster Mini wrote: I bet Brad will have it on the road before your josh ...nice pics anway
Nice score Brad... haha that is so true, good one boys and as always josh never do any job heh? no driving, no fixing, and no lifting..... |
Author: | Archangel007 [ Sun May 27, 2007 7:30 pm ] |
Post subject: | |
Brad, Would love to see a candy apple red Mini!!! |
Author: | Mini Mad [ Sun May 27, 2007 7:31 pm ] |
Post subject: | |
haha hey! it's just cause im the one behind the camera taking the pics I drove too so ner haha jeez you two are mean!! hahaha Wakefield & WSID 2008 Brad? |
Page 2 of 19 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |