ausmini
https://www.ausmini.com/forums/

Vtec or 4efte
https://www.ausmini.com/forums/viewtopic.php?f=23&t=31385
Page 1 of 3

Author:  hobble [ Thu May 03, 2007 11:47 pm ]
Post subject:  Vtec or 4efte

hi all i have a 1975 clubman and not sure what motor to put in it all i want is it to be fast very fast so would the vtec be the go or 4efte help would be great thank you

Author:  dove grey 64 [ Fri May 04, 2007 9:08 am ]
Post subject: 

i'd say vtec, but you can squeeze heaps out of both engines.

Author:  JC [ Fri May 04, 2007 10:17 am ]
Post subject: 

I say go with the 4EFTE. With the top mount gone it looks like its meant to be in the bay of a clubman.

Author:  simon k [ Fri May 04, 2007 10:38 am ]
Post subject: 

when you say VTEC, you could be talking about around 10 different honda engines... be specific like you have with 4EFTE...

I say if you want to go really fast, go for a Honda B18C from an Integra (Type R below...) - same size as a B16A, but 1.8ltr, and VTEC, and crazy powerful...

this one is for sale on OzHonda at the moment - 13.6 seconds, NA, in a heavy Honda.... beat that Mr 4EFTE :P

Quote:
Item

Complete B18C7 2000 ITR motor (roughly 90 000km)
ITR LSD gearbox 4.7FD
B-series Driveshaft
Exedy HD clutch
B-series Engine mounts
Accord Radiator
DynoDave Stage 2 headers
Hondata s200 (Launch control, datalogging) DynoDave tune
Top fuel exhaust under axle 60mm (fits EG hatch perfectly, exhaust will need to be modify for other car model)
Plazmaman Intake system (CAI setup)

Misc info

This setup has been tested and proven to run good times. Was previously in our Yellow EG NA-187 which ran 13.6@101MPH at wsid. Potentially can go faster than that with the right driver.



note: this setup does not run AC or PS. they can be arranged however.

NOT SEPERATING PARTS


Price

$8500 Ono Installed into EFI EG/DC2 (other cars pm for more info)

No dreamers or time wasters please

Contact

email ding_dong_dang@hotmail.com

phone 0403337740


and another...

Quote:
For sale: B18c (teg vtir motor) and gearbox
this is a project motor of mine that has become abandoned. you will get
the original pistons and rods.
eagle rods and srp 11:1 pistons
toda racing port and polish on head
clevite rod and main bearings
B series driveshafts (left shaft outside knuckle needs to be fixed)
b series gearbox.
the rear engine bracket for swap into ek or eg civic
i have the receipts for everything

Price and price conditions: $3000

Contact Details: PM, 0416411700, sales@dnaracingworks.com

Location: Campbelltown , NSW

Author:  miniboy1962 [ Fri May 04, 2007 11:30 am ]
Post subject: 

I think if you want/need a lot of help, there are guys on here who have posted up their 4EFTE conversion and there are a lot of pics and info about it. Whereas the VTEC may not be so popular in these circles. Both conversions look awesome and really it is much of a muchness, Powerwise just look at Bigbad and others, you aren't going to need any more power than that. From what i've heard the B16a takes up a lot more space. So for ease of conversion - probably go the 4EFTE. I think if you want an awesome machine and dont have to worry about money, go out and buy a cultus G13B AWD and mock that up, That way you'll be able to get all that power to ground without shredding tyres every week.

Anyways 4EFTE for ease of install, power available and help at hand...

Author:  JC [ Fri May 04, 2007 12:10 pm ]
Post subject: 

skssgn wrote:

this one is for sale on OzHonda at the moment - 13.6 seconds, NA, in a heavy Honda.... beat that Mr 4EFTE :P


Pfft - tell 'em to take the handbrake off.

http://www.austarletclub.com/forums/ind ... topic=7325

Author:  hobble [ Fri May 04, 2007 6:15 pm ]
Post subject:  vtec or 4efte

sorry i ment the b16a which will go harder stock in a mini i know the b16a motor you can get a crap load out of them if there a pain get fit that dont mater its just fun i have done conversions before just on a mini

Author:  13secmini [ Fri May 04, 2007 7:39 pm ]
Post subject: 

dont go the 4efte there way overated mate, stick with the a series there a very fast motor and will make mad skids :shock:

Author:  hobble [ Sun May 06, 2007 12:55 am ]
Post subject:  vtec

what motor do you mean by A series mini that would be a joke or honda

Author:  simon k [ Sun May 06, 2007 11:47 am ]
Post subject: 

JC wrote:
skssgn wrote:

this one is for sale on OzHonda at the moment - 13.6 seconds, NA, in a heavy Honda.... beat that Mr 4EFTE :P


Pfft - tell 'em to take the handbrake off.

http://www.austarletclub.com/forums/ind ... topic=7325


get your hand off it son.... how far under 10 seconds do you reckon that motor would go with a hairdryer stuck on.....

13sec is joking..... just ignore him - I mean, anyone who puts a 3 cylinder motor in a mini can't be sane...

Author:  13secmini [ Sun May 06, 2007 12:34 pm ]
Post subject: 

skssgn wrote:
13sec is joking..... just ignore him - I mean, anyone who puts a 3 cylinder motor in a mini can't be sane...


haha well i think im insane too throwing in a 3 banger motor that will make over 300% more power then a cooper 's' motor :D

Mate go a CB70, thats where all the smart money is going for quickest mini around wakefield park early 2008!

Author:  Archangel007 [ Sun May 06, 2007 2:40 pm ]
Post subject: 

13secmini wrote:
skssgn wrote:
13sec is joking..... just ignore him - I mean, anyone who puts a 3 cylinder motor in a mini can't be sane...


haha well i think im insane too throwing in a 3 banger motor that will make over 300% more power then a cooper 's' motor :D

Mate go a CB70, thats where all the smart money is going for quickest mini around wakefield park early 2008!


Oooh - Sounds like a challenge there Brad.

I'm up for it!!!

Simon - what about you?

Cheers,
Tricky

Author:  hobble [ Mon May 07, 2007 2:35 am ]
Post subject:  vtec or 4efte

thank all of you who help me out with ideas i hope i can get it do soon and then i might beable to give big brad a good go thank you

Author:  Mini Mad [ Mon May 07, 2007 10:35 am ]
Post subject: 

If all you want to do is go fast, buy something else.

define fast.

Haha Brad, bring on Wakefield 8)

Author:  mattywood [ Mon May 07, 2007 12:36 pm ]
Post subject: 

13secmini wrote:
dont go the 4efte there way overated mate,
I was thinking of going down the efte path as so may have done before. What's over rated about them? Not enough grunt for your $$.

Page 1 of 3 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/