ausmini
https://www.ausmini.com/forums/

nissan micra 1275 twin-cam?
https://www.ausmini.com/forums/viewtopic.php?f=23&t=79731
Page 7 of 7

Author:  TheMiniMan [ Tue May 05, 2015 3:29 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

OOPS... I MAY HAVE ACCIDENTLY FITTED A 16V FUEL INJECTED TURBO CHRAGED MOTOR INTO MY MINI
Image

Image

Image

Image

Image

Image

Ah well,,, i spose it will just have to stay there now:-)

:-)

Author:  LeylandMiniPhil98 [ Tue May 05, 2015 3:37 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

This should be fun...

Author:  Kennomini [ Tue May 05, 2015 5:19 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Sweet, good looking install Matt.

Author:  clovus [ Tue May 05, 2015 7:33 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Make it happen Matt!

Author:  clovus [ Fri May 08, 2015 6:48 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Can you take a photo of looking at the left hand side of the engine bay? Do you think I need to get rid of my brace bar on that side?

Author:  Archangel007 [ Sun May 17, 2015 6:34 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Kick-ass Matt, really well done.

Cheers,
Tricky

Author:  9YaTaH [ Mon May 18, 2015 9:44 am ]
Post subject:  Re: nissan micra 1275 twin-cam?

To paraphrase the fella in JAWS...yer gunna need bigger brakes! :shock:

Author:  TheMiniMan [ Wed May 20, 2015 12:49 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Hey Clive, the new frame comes with the brace-ing already done so yes you can remove both side brace bars from your mini

axles being done now, shouldn`t be too long

we have a new Alloy tig welder now so as soon as Dale comes by to teach me we will start on the inlet manifold(s)

:-)

thanks Tricky, means alot mate

& yes Mick,,, decent stoppers are here, Alloy 4-pot 8.4" will do the job nicely on mine
not sure what Clive has at this stage, i think he has "S" brakes & they should be fine
providing decent pads are fitted,,, & maybe just throw the thing into corners & drift a bit too :-)

it`s been a bit tricky sorting room for the exh pipes & the alternator & etc, but it`s all getting there

we`re doing 2x subframes currently but i might make another while we`re at it & hang it on the wall ready for anyone else interested at a later date,,, or maybe just another one for me :-)

Author:  vGmini [ Thu Oct 01, 2015 1:55 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

hey theminiman would you be willing to post some measurements from your subframe I'm restoring a mini and am currently looking into engine options as part of my initial research.

Author:  clovus [ Sat Oct 03, 2015 1:22 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

Why don't you just buy one off him? Will save you a lot of effort fabricating one and fettling ot to get everything to fit.

Author:  Archangel007 [ Sat Oct 10, 2015 10:31 am ]
Post subject:  Re: nissan micra 1275 twin-cam?

clovus wrote:
Why don't you just buy one off him? Will save you a lot of effort fabricating one and fettling ot to get everything to fit.


Yes it would!!

Author:  DA9jeff [ Thu Oct 15, 2015 5:41 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

I would be very interested in a subframe if they are available for purchase?

Author:  TheMiniMan [ Fri Oct 16, 2015 2:39 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

currenly doing 3x of them, but concidering doing more as soon as my metal-fab bloke comes back from fishing trip

might be a bit difficult to get him back from fishing just to fabricate a few more mini/micra subframes
but i`m trying:-)

Author:  TheMiniMan [ Fri Oct 16, 2015 2:40 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

oh &, axles are nearly finished :-)
sorry it`s taken so long,,, too much of my dads estate crap to sort inbetween
:-(

Author:  clovus [ Fri Oct 16, 2015 7:19 pm ]
Post subject:  Re: nissan micra 1275 twin-cam?

One of my surfing buddies has gone fishing at Fraser. Been gone 5 days and got a message saying now has no fixed timeline to come back. Fish must be on the chew!

Page 7 of 7 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/