ausmini
http://www.ausmini.com/forums/

Engineers Register. Tell us who the good engineers are!
http://www.ausmini.com/forums/viewtopic.php?f=23&t=8592
Page 2 of 2

Author:  Stuwey [ Wed Jun 27, 2007 12:58 pm ]
Post subject: 

http://www.carpoint.com.au/Tig/Minisite ... au&id=6659

Try that list if you like.

Here at work in Adelaide we use Tonkin's. Very professional, (and Graeme Burton there has already engineered 92's 4EFTE clubby here in SA.)

Author:  Davo111 [ Tue Nov 11, 2008 8:30 am ]
Post subject:  vacant vic.

so we don'ty hVE ANY mini friendly engineers here in Victoria then.... :cry: :cry:

Author:  Gnome [ Fri Nov 14, 2008 4:27 pm ]
Post subject: 

Yes I am also looking out for someone in vic, although, will an engeneer from another state do? I mean isnt an ozzy engeneer qualified no matter where he is from?

Author:  amos [ Tue Jan 13, 2009 1:15 pm ]
Post subject: 

It's not only the qualification of an engineering degree that is required, i'm fairly sure the engineer has to have CPE (Chartered Professional Engineer) status - which is at least 3 years experience and a few more reports / exams.

I'll post when i find out more about that though, as i'm a Mechanical Engineer from SA and i'm doing my own conversion over the next year or two - just gotta find the time!

Author:  con [ Wed Apr 07, 2010 10:33 pm ]
Post subject: 

Here is a new list from the RTA of Engineering Signatories.

http://www.rta.nsw.gov.au/registration/downloads/vsi/vsi_15_engineering_signatories_rev_20_23march_2010.pdf

Author:  Moriarty [ Thu Apr 08, 2010 10:56 am ]
Post subject: 

con wrote:

Other States would probably have a similar list of approved engineers like this who can sign off on modifications. Check out your local Transport Dept / RTA / etc website.

Bfeboi wrote:
I've talked to Peter Gillard from adr compliance in Leichardt, Sydney NSW and he is REALLY usefull

He answered all my questions and seemed to know ALOT about what needs to be done and what cant be done.


+1 on that. I spoke to Peter about my project - I've got a Mini K that I'm restoring and making light mods along the way. Peter used to be in the NSW Mini Club and I think he has helped out quite a few Mini owners, so he knows his way around a Mini and is familiar with quite a few of the aftermarket parts brands. His workshop is in Canterbury, although he does live around the corner from me so that's quite handy 8)

Author:  Moriarty [ Wed Nov 30, 2011 1:48 pm ]
Post subject: 

Thread revival - updated list (VSI 15, 22 Sept 2011) from NSW RTA is at:

http://www.rta.nsw.gov.au/registration/downloads/vsi/vsi_15_engineering_signatories_september_2011.pdf

Author:  lancashire lad [ Thu May 08, 2014 4:45 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

Anyone got an opinion on the best engineer to work with in Perth?

Cheers

Author:  braad [ Tue Apr 07, 2015 4:48 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

updated RMS list for NSW

http://www.rms.nsw.gov.au/documents/bus ... ifiers.pdf

Author:  braad [ Sun Apr 12, 2015 11:33 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

Anyone have any recommended engineers in Sydney? I'm looking for one now for my project.

I see Peter Gillard was recommended earlier, but it was 4 years ago

Author:  dacjac [ Sun Jul 26, 2015 4:20 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

I am currently dealing with Troy Brodie from Fink Engineering, In Wollongong. Highly recommended. Only ever talked to him on the phone so far but always returns my calls and gives me info to the questions I ask. Will be doing some mods to my allspeed subframe in the next month hopefully then will finally get a face to face. I have been talking to him and emails for about a year now.

Author:  apparition [ Fri Aug 18, 2017 12:51 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

Hi guys
Just wondering if there are any Engineers in Melbourne who you would recommend for a Honda Vtec conversion?

Thanks
Regards
Dan

Author:  _666_ [ Mon Apr 23, 2018 2:52 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

apparition wrote:
Hi guys
Just wondering if there are any Engineers in Melbourne who you would recommend for a Honda Vtec conversion?

Thanks
Regards
Dan


speak to user "Dutchys1978" he has completed this in victoria

Author:  Harley [ Mon Apr 23, 2018 9:50 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

Nope, Enkelman shut shop for personal project engineering. I tried to get them on board for mine.

Try contacting a mob by the name of Cartech - I've spoken to them and they'd have a look.

Author:  pockets [ Thu Oct 17, 2019 2:53 pm ]
Post subject:  Re: Engineers Register. Tell us who the good engineers are!

My 1977 VTEC Clubbie went through rego at Mt Gambier in March with no problems. My engineer was AUTEST and did a great job for me. It helped that a lot of the conversion was standard Metro front end from Watsons in the UK. No need to provide extra engineer's certification of fabricated parts. It also helped that the Watsons conversion comes with certification from a German firm (TUV) that certifies conversions, among other things. Provided you follow the Watsons instructions and use their kit, no probs. The only things AUTEST were required by the licensing folk to check were the brakes and the car's behaviour through witches' hats - all done at Goolwa airstrip. I needed to get the motor dynoed and emissions tested (on the dyno, at idle only, as it required only 1977 standards), and again, no problems. AUTEST also helped a lot by pointing out things to watch for when the car went in for roadworthy. All in all, quite painless and professionally done. Highly recommended. I now have a very nice road car that I'm very pleased with.

Page 2 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/