ausmini https://www.ausmini.com/forums/ |
|
Dutchy's Vtec - Round Nose, standard length https://www.ausmini.com/forums/viewtopic.php?f=23&t=89636 |
Page 11 of 15 |
Author: | Dutchy1978 [ Wed Aug 31, 2016 8:16 am ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Yep. That's on the cards. I have some 1mm HDPE that I'm going to make wheel arch liners out of. Need to protect all that is in the picture and the radiator too. it mainly comes out in the dry weather. |
Author: | 9YaTaH [ Wed Aug 31, 2016 8:18 am ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Dutchy1978 wrote: Yep. That's on the cards. I have some 1mm HDPE that I'm going to make wheel arch liners out of. Need to protect all that is in the picture and the radiator too. it mainly comes out in the dry weather. Obviously, well ahead of the game |
Author: | Hobson [ Wed Aug 31, 2016 9:26 am ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Dutchy1978 wrote: Hobson wrote: Interesting battery placement, I have always wondered how hard it would be to put a little brallie battery up front. There is no battery up front. Where are you looking? Or what do you think is the battery? apologies should have quoted the post from 69k1100, if you scroll down there are some pictures after the aerodynamics article. |
Author: | Bennjamin [ Sat Sep 10, 2016 4:48 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Looking great How did you go with your steering column ? |
Author: | Dutchy1978 [ Fri Sep 23, 2016 9:22 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
No problems. |
Author: | Bennjamin [ Sat Sep 24, 2016 10:57 am ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
As in , what did you do to your steering column ? Is it another model grafted to suit a minis dimensions or is it a custom make ? |
Author: | Dutchy1978 [ Sun Sep 25, 2016 10:45 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Standard Rover mini. I see others are changing them but I haven't been asked to so I'll leave it. |
Author: | Bennjamin [ Mon Sep 26, 2016 4:26 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
If your engineer was happy then nice one. More cash in the pocket for other things ! |
Author: | oldblade [ Mon Sep 26, 2016 7:05 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
OMG that Mini is insane and I love it it still looks like a mini and keeps that mini feel but it's Nut's |
Author: | Dutchy1978 [ Mon Sep 26, 2016 9:21 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
It's back together now. A wheel alignment has been done and it aligned quite nicely. No head aches. I made up some wheel arch liners out of 1.5mm HDPE to keep the water and dirt away from the radiator and keep the engine bay clean. Off to the Dyno on Thursday for tuning. |
Author: | Bennjamin [ Tue Sep 27, 2016 10:49 am ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
looking tough ! |
Author: | simon k [ Tue Sep 27, 2016 12:51 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
bloody hell, that's awesome, well done |
Author: | Dutchy1978 [ Tue Sep 27, 2016 9:54 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Thanks guys for the feedback. I'm pretty happy so far Sent from my iPad using Tapatalk |
Author: | nixphotopix [ Thu Sep 29, 2016 6:53 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Soo mean! So jealous! Sent from my iPhone using Tapatalk |
Author: | 13secmini [ Fri Sep 30, 2016 12:03 pm ] |
Post subject: | Re: Dutchy's Vtec - Round Nose, standard length |
Awesome car mate! congrats. |
Page 11 of 15 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |