ausmini
https://www.ausmini.com/forums/

Dutchy's Vtec - Round Nose, standard length
https://www.ausmini.com/forums/viewtopic.php?f=23&t=89636
Page 13 of 15

Author:  Dutchy1978 [ Tue Nov 08, 2016 12:19 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Excellent. Can't wait to see everyone's cars. Should be a good day.

Author:  Dutchy1978 [ Wed Nov 09, 2016 8:38 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Photos of the finished project.
Image
Image
Image
Image

Author:  simo74 [ Sun Nov 13, 2016 6:16 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

It's was good to meet you today and see your masterpiece in the flesh so to speak. You should be very proud this is an excellent conversion and better in real life that the photos.
Rob

Author:  Dutchy1978 [ Fri Nov 18, 2016 10:51 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Cheers thanks Rob. It was good to chat to yourself and other like minded mini people.

Author:  Dutchy1978 [ Fri Nov 25, 2016 4:55 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

After a few days of driving I realised that this was required to get the perfect clutch throw. Works a treat.
Image
Image

Author:  _666_ [ Fri Nov 25, 2016 8:38 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

I want one

Author:  simon k [ Fri Nov 25, 2016 2:07 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Dutchy1978 wrote:
After a few days of driving I realised that this was required to get the perfect clutch throw. Works a treat.


nice simple solution, though a bigger, maybe plastic foot might be a good idea - the bolt will probably thump a hole in your carpet

Author:  Dutchy1978 [ Fri Nov 25, 2016 4:23 pm ]
Post subject:  Dutchy's Vtec - Round Nose, standard length

Yeh I thought of that but I don't need to push it hard to the floor so it should be ok. Good advice though.

Author:  Harley [ Fri Nov 25, 2016 7:11 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

How do you find the weight of the clutch pedal?

Author:  simon k [ Sat Nov 26, 2016 7:15 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Dutchy1978 wrote:
Yeh I thought of that but I don't need to push it hard to the floor so it should be ok. Good advice though.


when you're fanging through the hills and the red mist descends, you're not going to be gentle with it, you'll be punching it to the floor and back up as quick as you can...

Author:  Dutchy1978 [ Sat Nov 26, 2016 7:37 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

True. Fanging around is pretty common now with the new engine.

Author:  simon k [ Sat Nov 26, 2016 10:03 am ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Dutchy1978 wrote:
True. Fanging around is pretty common now with the new engine.


I bet...

Author:  Dutchy1978 [ Wed Feb 08, 2017 1:09 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Driving around has been fun but as we all know, it is a project car and there is always something we can do to it.
I wanted wider wheels to fill out the wheel arches but not as wide as the usual minilites or superlites. I also wanted something different.
I found these and have been impressed.
Ultralite Enki 13x7 but with an offset of +2 so they don't stick out as far as the usual Ultralites. No spaces required either.

Image
Image
Image

Author:  _666_ [ Wed Feb 08, 2017 2:19 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Very nice, where did you find them?

Author:  Dutchy1978 [ Wed Feb 08, 2017 7:32 pm ]
Post subject:  Re: Dutchy's Vtec - Round Nose, standard length

Mini sport UK

Page 13 of 15 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/