ausmini
https://www.ausmini.com/forums/

Anyone put a Suzuki g13 into a clubman
https://www.ausmini.com/forums/viewtopic.php?f=23&t=96800
Page 1 of 1

Author:  Barney [ Tue Feb 13, 2018 11:52 am ]
Post subject:  Anyone put a Suzuki g13 into a clubman

Like to find anyone who has played with putting a Suzuki engine into a clubman
I'm in Melbourne , not that that really matters
Just like hear about problem solving etc

Author:  Harley [ Tue Feb 13, 2018 5:58 pm ]
Post subject:  Re: Anyone put a Suzuki g13 into a clubman

I've done a couple of G13b's into roundies and thats harder. What do you want to know?
What problems have you got?

Author:  Kennomini [ Tue Feb 13, 2018 11:45 pm ]
Post subject:  Re: Anyone put a Suzuki g13 into a clubman

Hey Harley, didn't u make those tube subrames for the 13B's?

Author:  Harley [ Wed Feb 14, 2018 10:03 am ]
Post subject:  Re: Anyone put a Suzuki g13 into a clubman

Yep, did a few of them a long time ago.
No more the same are ever going to happen though!

Author:  GtiMini [ Thu Feb 15, 2018 12:26 pm ]
Post subject:  Re: Anyone put a Suzuki g13 into a clubman

I've put one in a roundnose and 2 in clubmans. Subframes and challenges are the same but the tolerances in the roundnose are tighter. I even managed to fit a turbo in a clubman but didn't even try on the roundnose. (others have).

There are no problems that can't be solved but you will need to be inventive and prepared cut stuff up. Apart from the making a custom subframe there are lot of brackets and stuff that need to be fabricated to adapt things. It's not hard, just needs lots of thinking, and beer, and a good welder and grinder. And of course CAD work (Cardboard Aided Design).

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/