I have a new toy to play with while the S is away.
| ausmini https://www.ausmini.com/forums/ |
|
| Hopw to make your own Hydro Pump https://www.ausmini.com/forums/viewtopic.php?f=25&t=59552 |
Page 4 of 4 |
| Author: | Morris 1100 [ Sun Jan 31, 2010 7:38 pm ] |
| Post subject: | |
I have a new toy to play with while the S is away.
|
|
| Author: | sgc [ Sun Jan 31, 2010 7:42 pm ] |
| Post subject: | |
Morris 1100 wrote: I have a new toy to play with while the S is away.
I reckon we've got about equal chances of finding spares 
|
|
| Author: | Mick [ Sun Jan 31, 2010 7:43 pm ] |
| Post subject: | |
I think it needed to go off to the blaster as well as the shell! |
|
| Author: | Morris 1100 [ Sun Jan 31, 2010 7:52 pm ] |
| Post subject: | |
sgc wrote: Morris 1100 wrote: I have a new toy to play with while the S is away. I reckon we've got about equal chances of finding spares When I pulled it apart I found that it is so simple and that the only parts that wear out are pretty easy to make or find. Be very careful when pulling one apart as there are little non-return valves that fall out of the banjo bolts when you undo them. The valves are just a pair of plastic/fibre/mica discs in the vacuum side and a ball bearing in the pressure side. I would bet that if the vacuum side is not working it will be a missing valve from where the previous owner has lost it. Mick wrote: I think it needed to go off to the blaster as well as the shell! Funnily enough it is now dismantled in the shed and going to the blaster in the morning.
|
|
| Author: | Mick [ Sun Jan 31, 2010 7:54 pm ] |
| Post subject: | |
Morris 1100 wrote: Mick wrote: I think it needed to go off to the blaster as well as the shell! Funnily enough it is now dismantled in the shed and going to the blaster in the morning.It should have a resto thread (true!). There's a few out there needing overhaul. |
|
| Author: | Morris 1100 [ Sun Jan 31, 2010 7:58 pm ] |
| Post subject: | |
Mick wrote: Morris 1100 wrote: Mick wrote: I think it needed to go off to the blaster as well as the shell! Funnily enough it is now dismantled in the shed and going to the blaster in the morning.It should have a resto thread (true!). There's a few out there needing overhaul. I may do that. 
|
|
| Author: | sgc [ Sun Jan 31, 2010 8:25 pm ] |
| Post subject: | |
On a slightly related note, I realised today that I'm officially getting old... I stuck an extra inch of ride height on it to get it off the bump stops and improve the ride quality.. 
|
|
| Page 4 of 4 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|